Product descriptions:

Air support systems are a valuable addition to laser cutters, improving their cutting capabilities and safety features. By directing a continuous stream of air over the material while cutting or engraving, these systems create a cooling barrier between the laser beam and the material. This ensures that the laser maintains a safe operating temperature and prevents overheating and potential fire hazards.
A key advantage of air support is the ability to prevent wood charring. By targeting the airflow to the laser's cutting point, the accumulation of residue on the wood surface is minimized, resulting in cleaner, more precise cuts.

High airflow and low noise: ACMER C4 Air Assist/Air Compressor can deliver a high airflow of 30L/min, which can effectively remove the smoke and dust caused by laser cutting and engraving. This can improve the quality and clarity of your work and protect your health and safety. The ACMER C4 air assistant also has a low noise level of less than 40dB, which can reduce the disturbance and annoyance caused by loud noises.

Easy to install and operate: ACMER C4 air support is easy to install and operate. Included is an instruction manual that will walk you through the steps of connecting the air assist to your laser engraver, as well as a power adapter, hose, and nozzle. You can simply connect the power supply and connect the hose and nozzle Connect it to the air support and your laser engraver and turn on the switch to start working.

Wide Compatibility: ACMER C4 Air Assist is compatible with most laser engravers on the market. You can easily use it with your existing laser engraver without any compatibility issues.​

Specification:

Model: ACMER-C4
Body size: 145x135x70mm
Voltage: 110V/220V
Power: 36W
Noise: ≤40dB
Airflow: 30L/min
Maximum atmospheric pressure: 0.03 MPa
Air outlet outer diameter: 4mm (Air hose with inner diameter of 4mm can be connected)
Packaging size: 26 x 26 x 17 cm