Specifications:
Name:Jiecaizi GPS Speedometer Odometer
Material: PVC+Stainless steel+Glass
Panel color:White
Backlight color: Red
Fixing dimension: 85mm(3-3/8")
Working voltage:9~32VDC
Working current: ≤100mA
Operating temperature: -30°~75°
Storage temperature:-40°~85°
Levels of protection: IP67
Indicating range: 0~200km/h
Suitable for car truck boats off-roadvehicles boats
Features:
-Protection grade is IP67.
-100% brand new and high quality
-With polarity reverse protection function.
-The durability is good, and the seismic performance is good.
-Thesignal comes directly from the satellite signal receiver(GPS Speed Sensor)
-The gauge has the advantages of high precision,quick location confirmation and short start up time.
-With ultra-wide working voltage design(long-term operating voltage: 9~32V,Maximum up to:36V(≤ 1 min)
Installation instructions:
1.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 85mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 85mm of the instrument panel at the back of the instrument.
2.After the instrument is mounted in the panel,Screw down with a fixed ring.Opening a hole in the panel (your cabin board and dashboard) with a diameter of 85mm,Insert meter into the hole,The panel corresponding to the instrument panel is marked with a convex table,and open a small notch in this location,To ensure that there is at least 85mm of the instrument panel at the back of the instrument.
3.Connect the wire,the instrument housing is directly connected to the 9~36V power supply.
4.Insert wire harness,Firmly locked in the table.
Package List:
1 x GPS Speedometer
1 x Standard Cables
1 x GPS Receiver
1 x Installation Instruction
