SKF SCF 30 ES Rod Ends With A Welding Shank 30mm Bore
A rod end bearing, also known as a heim joint (N.
Product Description
A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required, and where a clevis end (which requires perfect 90-degree alignment between the attached shaft and the second component) is unsuitable. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be either male or female.
Specifications
- Bore diameter d: 30mm.
- Diameter head d2max: 66.5mm.
- Width inner ring B: 22mm.
- Width head C1max: 29mm.
- Height shank end face - centre rod end eye h2js13: 51mm.
- Angle of tilt : 6.
- Raceway diameter inner ring dk: 40.7mm.
- Diameter welding shank d5max: mm.
- Diameter centering pin at welding shank end d6: mm.
- Length (height) housing l6max: 85mm.
- Distance shank chamfer - centre rod end eye l7min: mm.
- Length chamfer at welding shank end l8: mm.
- Chamfer dimension bore r1min: 0.6mm.
- Basic dynamic load rating C: 62kN.
- Basic static load rating C0: 110kN.
- Specific dynamic load factor K: 100N/mm.
- Material constant KM: 330.