Product Description

PX24 is the complete maintenance treatment for protection against:

• Corrosion
• Water displacement
• Lubrication and Light surface rust removal

One simple application by spray - swab or dip stops the spread of existing corrosion; gives lasting protection against further attack and removes and repels ambient moisture.Fitted with a 360 degrees Spray System for all angle use - even upside down.APPLICATIONPX24 is specifically used for preservation and corrosive inhibition after operation of certain gas turbine engines and as a de-watering and protective fluid.PX24 is ideal for use on all mechanical and electrical equipment being suitable for use on low voltage equipment up to 250V. As a penetrant - it will quickly free seized nuts - bolts and bearings; whilst the highly effective water displacing properties make the perfect damp-start solution for ignition systems and other electrical equipment.The protective - lubricating film is non-conductive and remains operational even at severe sub-zero temperatures. It will not affect paints or plastics and is lastingly effective on all metals; including aluminium. Freshly machined surfaces resist finger-marking and will stay clean and bright -even in highly corrosive conditions

• Appearance : Clear amber coloured liquid
• Odour : Solvent
• Specifications/Approvals : Meets Def. Stan. 68-10/Issue 5
• Nato Code C-634
• NATO stock number 6850-99-224-4966
• Agusta Westland Helicopters WHPS 158 Group 5
• SG@25OC : 0.796
• Initial boiling point : 147OC
• Temperature range : Operational from 20OC to + 115OC
• Moisture content : <700 ppm
• Copper corrosion : Max 1; no pitting or etching (IP154)
• Water displacement : Complete displacement of Saline test solution(IP178B)
• Corrosion protection : No corrosion (IP178A)
• Solubility : Soluble in hydrocarbon solvents - insoluble in water
• Film thickness : 1.65 x 10-4cm
• Film Weight : 1.46 g/sq. metre

Compatibility :

• Rubber:
• No visible affect when sprayed. Most rubbers will swell after prolonged immersion
• Paintwork:
• No effect on surfaces. Wax polishes and coatings may be softened after prolonged exposure
• Plastics:
• No visible affects after 240 hours immersion of:
• Formica
• Acrylic sheet
• Polyester glass fibre laminate
• Vinyl sheet and Ebonite
• Over-painting:
• Although not always necessary - removal of PX24 from surfaces to be painted is recommended

• Flammability : Not classified as flammable under CHIP Regulations
• Flashpoint : >80OC
• Packaging : 500ml

STORAGEThe product may be stored at normal ambient temperatures and has a shelf-life of not less than 72 months with correct storage.