Specifications:
Name:Jiecaizi GPS Speedometer Odometer
Material: PVC+Stainless steel+Glass
Panel Color:White
Backlight Color:Red (default) →green → blue → white → yellow → yellow green → orange → Purple → (automatic).
Fixing Dimension: 85mm(3-3/8")
Working Voltage:9~32VDC
Working Current: ≤100mA
Operating Temperature: -30°~75°
Storage Temperature:-40°~85°
Levels Of Protection: IP67
Indicating Range: 0~80MPH
New Features:
1) 7 Colors Backlight Optional
Qickly press the SET button (<1second) to change the backlights as below:
Red(Defaut)→Green→Blue→White→Yellow→Yellow Green→Orange Purple→Automatic mode
Automatic mode: The color will cyclically flash as above for every 2 seconds
2) Odometer Programmable
If the device is well connected with GPS signal,long press the button(≥5 seconds) to enter into the Odometer Programmable Mode(6 Digits Can be Reset).we name it X1 X2 X3 X4 X5 X6
If you see digit X1 flashing,it means that you can set it from 0 to 9 by long pressing the button.
If you want to modify digit X2 X3 or X4,Just take a quick press on the button to move to the digit that you want to work with.
If no movement is done within 5 seconds, it will switch out of the Programmable mode and save all the changes if applicable.
3) Odometer Reset to Zero
Press the button(≥10 seconds) to set the total mileage to zero
4) Odometer Accumulation
Accumulated mileage, it never returns zero when power off
3.Connect the wire,the instrument housing is directly connected to the 9~36V power supply.
4.Insert wire harness,Firmly locked in the table.
-Protection grade is IP67.
-With polarity reverse protection function.
-The durability is good, and the seismic performance is good.
-Thesignal comes directly from the satellite signal receiver(GPS Speed Sensor)
-The gauge has the advantages of high precision,quick location confirmation and short start up time.
1 x GPS Speedometer
1 x Standard Cables
1 x GPS Receiver
1 x Installation Instruction