The backing of our Hook and Loop Fastener is tissue coated with a high performance acrylic -based pressure sensitive adhesive. This adhesive strength builds up over time allowing for some responsibility before achieving full bond strength. The adhesive bonds well to high and medium surface energy substrates, such as clean, dry metals and some low surface energy substrates such as polycarbonate, polystyrene, acrylic and nylon. It boasts excellent heat and moisture resistance as well as UV stability and excellent shear strength.
This loop fastener have high density and strong holding strength that have higher locking strength and the loop will not loose. The back sticky side bond strength build over time, so we recommend wait for around 24 hours to obtain the best bond strength after gluing on the surface .
How to bond the back sideA: Clean the surface(with 4298UV adhesion promoter if possible) B: Wipe dry the surface to obtain optimum adhesion. C: Applying tape to surface . D: Roll/press finished joint to help building bond strength. |
High densityThe fastener strip have high density hook and loop, it have strong strength and thousands times service life. |
Bond > LockThe bond strength must be stronger than lock strength, then it will not peel off from the adhered surface. So, it is very important for the correct back side tape usage due to the strong dual lock strength. |
Widely useRecommended Applications:
|
Not recommendedWe do not recommended to use for water/humid surface, dust surface, not smooth surface, old wall. It will damage the wall or wont bond well. |
The back side applying surfaceConformable foam tape bonds well to a variety of substrates including metal, wood, tile, plastic, glass, concrete wall, cloth etc. |