Note

• One remote control can control four gate openers, but the control boards should be same.
• COMPATIBILITY--Our remote control is compatible with the gate opener of GATEXPERT,G.T.MASTER, and we can't promise it can also match other gate opener.

Feature

• SINGLE BUTTON MODE -- The four buttons have the same function, one same button on the remote control to circularly control the main engine OPEN/STOP/CLOSE/STOP.
• The remote contol has four buttons, if button 1 is damaged or insensitive, you can delete the remote controls first, then use button 2, button 3 or button 4 to relearn and control the gate opener.

Package Includes

• This item includes 1pc RC4B11 remote control, without user manual, you can find the operation method in this product page.

PY600ACN control board

Add extra remote controls:

1.Press the learning button AN1 on the control board, and the indicator light LED2 will be on;

2.Press the same button on the remote control twice, the LED2 light flashes repeatedly and then turns off, the remote control learning is finished.

Delete the remote control:

Press the learning button AN1 two sec. and the LED light will be on; then hold the button until the light turns off. This indicates that all remote controls that have finished learning previously have been deleted.

IDE200 control board

Add extra remote controls:

1.Press the button TS3, and the display screen shows C1;

2.Press the button you want to program, and learning is finished until digital is shown. (The default remote control mode is Step by Step)

Delete the remote control:

Press and hold the button TS3 until it shows OK, which indicates that all the remotes have been deleted.

PY300DC control board

Add extra remote control:

1. Press CODE, a dot is indicated on the LED display.

2. Press the transmitter button which you want to use, then press the same button again after one second.

3. The dot on the LED display will flash then turn off.

4. “||” is indicated on the LED display, then the learning process is finished. At most 20 remote controls can be learned.

Delete remote control:

Press and hold CODE until “C” is indicated on the LED display. This indicates that all remote controls that learned previously have been deleted.