Specification:
100% brand new.
Working voltage: For DC 12V (9V~14V)
Static Current: <=4mA
Working temperature: -10℃~+50℃
Remote control working voltage:DC6V/9V/12V
Remote control frequency range: 315Mhz or 433Mhz
Remote control distance: open areas《150M
Item Size: like the picture show.
Package Size: about 15.8cm(L) X 9cm(W) X 6.5cm(H)
Features:
- 100% Brand new.
- Phonic alarm, it can be use to locate your motorcycle
- Engine immobilization and anti-hijacking functionality
- Four sensitivity alarm settings
- This is a simple DIY installation unit with no special tools needed
Function Key: (4 buttons)
Arm/Anti-robbery: Remote lock
Disarm: Remote unlock style
Remote Start Engine: Remote start style
Find Vehicle: A bell style
Functions:
1. Arm: Press the Arm/Anti-robbery button, the indicator light flashes once, the siren beep once and the status of alarm will be activated automatically after 3 seconds.
2. Disarm: Press the Disarm button, the indicator light flashes 2 times and the siren beep 2 times, then the alarm system is in the "Disarm" mode.
3. Remote Start ON: Within 2 seconds, the connection press the start button twice, to start the engine.
4. Remote Start OFF: In the start state, Press the Disarm button to stop the engine.
5. Find Vehicle: Press Vehicle Finder button, the indicator light flashes 15 seconds and siren beep 15 seconds, Allow owners to find the location of the vehicle, to stop press any button.
6. Anti-robbery and Assistance: When the motocycle is bobbed and is drive away, the motorcycle owner only press the Arm/Anti-robbery button, the engine will stop at once, the siren will beep and the indicator light will flash.
7. Shock Sensor:
Warn away: After arming if any light impact, the indicator light flashes 5 times and siren beep 5 times.
Full Trigger: After arming if any heavy impact, the indicator light flashes 1 seconds and siren beep (6 tones) 15 seconds.
8. Ignition Trigger: The ignition trigger: in the alarm state, if anyone tries to ignition, the siren starts alarming and the indicators starts flashing.
9. Immobilizer: in the alarm state, the siren starts alarming, the indicator light flashes and the engine cannot be started.
10. Shock Sensor Setting: Keep pressing the fine vehicle button, the remote can adjust the sensor sensitivity of level 1 to 5, according the number of siren beep to set level, (level 1 lowest, level 2 low, ... , level 5 highest)
Note: for remote start engine type
Deutsch
Spezifikation:
100% nagelneu.
Arbeitsspannung: Für DC 12 V (9 V ~ 14 V).
Statischer Strom: <=4mA
Arbeitstemperatur: -10℃~+50℃
Betriebsspannung der Fernbedienung: DC6V/9V/12V
Frequenzbereich der Fernbedienung: 315 MHz oder 433 MHz
Fernbedienungsentfernung: offene Bereiche《150M
Artikelgröße: wie abgebildet.
Verpackungsgröße: ca. 15,8 cm (L) x 9 cm (B) x 6,5 cm (H).
Merkmale:
- 100% nagelneu.
- Phonischer Alarm, mit dem Sie Ihr Motorrad orten können
- Motor-Immobilisierungs- und Anti-Hijacking-Funktionalität
- Vier Empfindlichkeitsalarmeinstellungen
- Dies ist eine einfache DIY-Installationseinheit, für die kein Spezialwerkzeug erforderlich ist
Funktionstaste: (4 Tasten)
Arm/Anti-Raub: Fernverriegelung
Entschärfen: Fernentriegelungsstil
Fernstartmotor: Fernstartstil
Fahrzeug finden: Ein Glockenstil
Funktionen:
1. Scharfschalten: Drücken Sie die Scharfschalt-/Anti-Raub-Taste. Die Kontrollleuchte blinkt einmal, die Sirene piept einmal und der Alarmstatus wird nach 3 Sekunden automatisch aktiviert.
2. Unscharf: Drücken Sie die Unscharf-Taste, die Kontrollleuchte blinkt 2 Mal und die Sirene piept 2 Mal, dann befindet sich das Alarmsystem im „Unscharf“-Modus.
3. Fernstart EIN: Innerhalb von 2 Sekunden drücken Sie zweimal die Starttaste, um den Motor zu starten.
4. Fernstart AUS: Drücken Sie im Startzustand die Entriegelungstaste, um den Motor zu stoppen.
5. Fahrzeug finden: Drücken Sie die Fahrzeugfinder-Taste. Die Kontrollleuchte blinkt 15 Sekunden lang und die Sirene piept 15 Sekunden lang. Ermöglichen Sie dem Besitzer, den Standort des Fahrzeugs zu finden. Zum Stoppen drücken Sie eine beliebige Taste.
6. Raubschutz und Hilfe: Wenn das Motorrad ins Wanken gerät und weggefahren wird, drückt der Motorradbesitzer nur die Scharf-/Raubschutztaste, der Motor stoppt sofort, die Sirene piept und die Kontrollleuchte blinkt.
7. Stoßsensor:
Warnen: Nach dem Scharfschalten blinkt die Kontrollleuchte bei einem leichten Aufprall fünfmal und die Sirene piept fünfmal.
Vollständiger Auslöser: Nach der Scharfschaltung bei starkem Aufprall blinkt die Kontrollleuchte 1 Sekunde lang und die Sirene piept (6 Töne) 15 Sekunden lang.
8. Zündauslöser: Der Zündauslöser: Wenn im Alarmzustand jemand versucht, die Zündung zu starten, gibt die Sirene Alarm und die Anzeigen beginnen zu blinken.
9. Wegfahrsperre: Im Alarmzustand beginnt die Sirene zu alarmieren, die Kontrollleuchte blinkt und der Motor kann nicht gestartet werden.
10. Einstellung des Erschütterungssensors: Halten Sie die Feintaste des Fahrzeugs gedrückt. Die Fernbedienung kann die Sensorempfindlichkeit der Stufen 1 bis 5 entsprechend der Anzahl der Sirenentöne einstellen, um die Stufe einzustellen (Stufe 1 am niedrigsten, Stufe 2 am niedrigsten, ..., Stufe). 5 am höchsten)
Hinweis: Für Motortyp mit Fernstart