The second Beomaster with both standard speaker outputs and Powerlink connections letting you use the remarkable active Beolab range of speakers
The second Beomaster with real glass touch panel but without the ostentation of the chrome finish on the 4500 adding that real touch of class
A wonderful gunmetal grey panel along a solid glass touch panel. It's only taken smartphones a decade to catch on!
Two sets of speakers can be connected at the same time, allowing a second room to play the same music - great for parties
Wall-mountable vertically with the dedicated B&O bracket letting it sit flush to the wall and out of reach of the children

The QUALITRONICS DIFFERENCE

The glass panel is checked for foam bonding deterioration. If loose, the glass and the frame are removed and the foam (now a very sticky mulch) is removed from both with a special solvent (a one hour job at least) and new tape is applied. The sensor nodes are cleaned and checked for a good contact. Then the frame and glass are put back. Each of the touch buttons is checked again. All speaker outputs are tested, including the Powerlink for uniform sound balance. All inputs are tested to ensure proper function and the whole unit is then valeted.

Match with:

Beocord 3500 cassette recorder in matching aesthetics and also flush-mountable
Beogram 3500 RIAA tangential record deck - wall mountable on a B&O 'floating' plate (horizontally) available in my other listings
Beogram CD 3500, the same size as the Beocord and aligns with the two other units seamlessly, either on the wall or a cabinet
Beolink 1000 remote for convenient operation from your armchair, swap between formats, pause or increase volume
Beovox RL45 speakers for ultimate flexibility of placement and a concave look to be opposite to the slightly convex units

Upgrade with:

Beo4 remote control for extra functions and ability to control more B&O equipment like TV and home automation
Beovox RL60 or RL6000 for louder output that's still composed

Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that service

TESTIMONIALS

" "

BeoMaster 3500 Tuner/Amplifier

Manufactured: 1990 - 1993
Designer: Jacob Jensen
Colours: Grey

Beomaster 3500 was a part of Beosystem 3500 which comprised the Beomaster 3500 receiver, Beogram 3500 Cd PLayer, Beocord 3500 cassette recorder, a pair of Beovox Redline RL35 speakers and a Beolink 1000 remote control. All available in my other listings - please enquire

The system's lines were pure with everything superfluous omitted. It was specially designed to hang either on a wall or sit on a shelf or table. A light touch on its illuminated display gave immediate access to AM/FM receiver, CD player and cassette recorder; all of which were the latest and best in their respective fields.

Beomaster 3500, like several other products of the late 1970s right up to the Beosystem 4500 was based upon Jacob Jensen’s design for the superlative Beomaster 1900 designed and produced some fourteen years earlier. However, finished in gunmetal grey, Beomaster 3500 looked and was regarded as something quite different from the original product on which it was based.

BeoMaster 3500 Tuner/Amplifier Product Specifications

Types:
EUR 2966 (1990 - Sept 1993)
GB 2967 (1990 - Sept 1993)
US 2968 (1990 - Sept 1993)
Long-term max. output power IEC: 2 x 55 W / 8 ohms
Harmonic distortion DIN/IEC: < 0.08 %
Power output 20 - 20,000 Hz IHF: 2 x 20 W / 8 ohms
Total hamonic distortion IHF: < 0.1 % at 20 W 20 - 20,000 Hz
Intermodulation: < 0.1 %

Bass control at 40 Hz:: +/- 12 dB
Treble control at 12000 Hz: +/- 12 dB

FM range:
Type: 2961, 2962, 2963, 2965: 87.5 - 108.5 MHz
Type: 2964: 76 - 90 MHz

Power supply: 2966: 220V
2967: 240V
2968: 120V
Power consumption: 10 - 135 W

RIAA amplifier: No
Dimensions W x H x D: 62 x 7 x 25cm
Weight: 7 kg

Connections: Speakers 2 sets
CD: DIN
TP 1: DIN
AUX: DIN
OH/TP2: DIN
PowerLink: 2

Link compatibility: Master Control Link