It is a highly practical, cost-effective, handheld oscilloscope signal generator for the maintenance industry and R & D education industry people. The oscilloscope has a 5MS / s real- sampling rate, 1MHz bandwidth, and complete trigger function (, normal, automatic), for the cycle of analogue signals and nonperiodic digital signals can be freely used, to 400V voltage measurement with high efficiency of -button AUTO, without the need for cumbersome adjustments to display the waveform being measured. In addition, it also has a signal generator function (10KHz), is equipped with a 2.8-inch 320 * 240 resolution full clear-definition LCD screen, and a built-in 1000mAh high-capacity . Suitable for utility measurements, DIY learning, automotive repairs, home appliance repairs, research and teaching, overhaul, and so on.
Features:
【Fine Workmanship】: High-sensitivity buttons to provide a simple and easy-to-understand operating experience. Type-C port supports firmware upgrading and . 90 ° foldable bracket placement, free your hands. Gear toggle button for switching adjustment at will. Built-in 1000mAh high-capacity , with long-lasting endurance and long durability.
【2in1 Design with 2.8 Inch Display】: This product ingeniously integrates digital oscilloscope, and signal generator functions into device. With a 2.8-inch 320*240 resolution display, the screen readings are clearer. Data visualization design, the user-friendly interface design and operation mode, so that users do not need to spend a lot of to learn to quickly get started, and improve work efficiency.
【Signal Generator】: Equipped with a built-in signal generator function, and built-in 14 kinds of adjustable waveforms, a variety of diverse waveforms can be better used to help beginners learn to use the oscilloscope. With automatic waveform measurement and recognition function, no need to display the measured signal waveform clearly without the measured signal waveform.
【Digital Oscilloscope Function】: The real- sampling rate of the oscilloscope is to 5MS/s, which can capture more signal details and provide more accurate measurement results. 1M bandwidth can meet the testing needs of most electronic devices. With a variety of waveform waveform measurements and analysis functions to meet your daily needs. Support pause zoom waveform, moving waveform, whether you are looking for hidden noise signals, or in-depth analysis of complex modulation patterns, can be satisfied. Support vertical sensitivity adjustment, base adjustment. Support 220 V mains detection, switching powersupply detection, pulse signal detection, other waveform measurements.
【Wide Applications】: Lightweight and space-saving, can be carried outside work, energy efficient, with the automatic shutdown function. Applicable to a variety of occasions, it can easily handle measurements in a variety of fields and is widely used in the testing and debugging of electronic circuits, and repairing of electronic elements. Suitable for utility measurements, DIY learnings, automobile repairs, home appliance repairs, research and teachings, overhauls, and so on.
Specifications:
Name: 2in1 Oscilloscope Signal Generator
Material: ABS
Type: standard configuration, high configuration (optional)
: 1 * built-in 1000mAh (included)
Display: 2.8inch display
Screen resolution: 320*240
USB : 5V, 1A
Oscilloscope parameters:
Bandwidth: 1M
Sampling rate: 5MS/s
Vertical sensitivity: 10mV/div-10V/div
base: 500ns-20s
Voltage: X1 ±40V (Vpp: 80V); X10 ±400V (Vpp: 800V)
Trigger: auto, normal,
Trigger edges: risingedge, fallingedge
Calibration squarewave frequency: 1K
Duty cycle: 50%
Amplitude: 3.3V
Signal gonerator parameters:
Frequency: 1K
Duty cycle: 0-100% (rectangular waves and sawtooth waves)
Amplitude: 0.1-3.3V
Waveforms: 14 waveforms
Item size: 99 * 68.3 * 19.5mm / 3.90 * 2.69 * 0.77in
Item weight: 100g / ounce
Package size:
Standard configuration: 125 * 85 * 40mm / 4.92 * 3.35 * 1.57in
High configuration: 210 * 150 * 50mm / 8.27 * 5.91 * 1.97in
Package weight:
Standard configuration: 168g / 5.93ounce
High configuration: 243g / 8.57ounce
Packing List (standard configuration):
1 * 2in1 Oscilloscope Signal Generator
1 * Clip
1 * Cable
1 * Guideline
1 * Lanyard
OR
Packing List (high configuration):
1 * 2in1 Oscilloscope Signal Generator
1 * Clip
1 * Cable
1 * Connector
1 * P6100 Probe
1 * Guideline
1 * Lanyard
Features:
【Fine Workmanship】: High-sensitivity buttons to provide a simple and easy-to-understand operating experience. Type-C port supports firmware upgrading and . 90 ° foldable bracket placement, free your hands. Gear toggle button for switching adjustment at will. Built-in 1000mAh high-capacity , with long-lasting endurance and long durability.
【2in1 Design with 2.8 Inch Display】: This product ingeniously integrates digital oscilloscope, and signal generator functions into device. With a 2.8-inch 320*240 resolution display, the screen readings are clearer. Data visualization design, the user-friendly interface design and operation mode, so that users do not need to spend a lot of to learn to quickly get started, and improve work efficiency.
【Signal Generator】: Equipped with a built-in signal generator function, and built-in 14 kinds of adjustable waveforms, a variety of diverse waveforms can be better used to help beginners learn to use the oscilloscope. With automatic waveform measurement and recognition function, no need to display the measured signal waveform clearly without the measured signal waveform.
【Digital Oscilloscope Function】: The real- sampling rate of the oscilloscope is to 5MS/s, which can capture more signal details and provide more accurate measurement results. 1M bandwidth can meet the testing needs of most electronic devices. With a variety of waveform waveform measurements and analysis functions to meet your daily needs. Support pause zoom waveform, moving waveform, whether you are looking for hidden noise signals, or in-depth analysis of complex modulation patterns, can be satisfied. Support vertical sensitivity adjustment, base adjustment. Support 220 V mains detection, switching powersupply detection, pulse signal detection, other waveform measurements.
【Wide Applications】: Lightweight and space-saving, can be carried outside work, energy efficient, with the automatic shutdown function. Applicable to a variety of occasions, it can easily handle measurements in a variety of fields and is widely used in the testing and debugging of electronic circuits, and repairing of electronic elements. Suitable for utility measurements, DIY learnings, automobile repairs, home appliance repairs, research and teachings, overhauls, and so on.
Specifications:
Name: 2in1 Oscilloscope Signal Generator
Material: ABS
Type: standard configuration, high configuration (optional)
: 1 * built-in 1000mAh (included)
Display: 2.8inch display
Screen resolution: 320*240
USB : 5V, 1A
Oscilloscope parameters:
Bandwidth: 1M
Sampling rate: 5MS/s
Vertical sensitivity: 10mV/div-10V/div
base: 500ns-20s
Voltage: X1 ±40V (Vpp: 80V); X10 ±400V (Vpp: 800V)
Trigger: auto, normal,
Trigger edges: risingedge, fallingedge
Calibration squarewave frequency: 1K
Duty cycle: 50%
Amplitude: 3.3V
Signal gonerator parameters:
Frequency: 1K
Duty cycle: 0-100% (rectangular waves and sawtooth waves)
Amplitude: 0.1-3.3V
Waveforms: 14 waveforms
Item size: 99 * 68.3 * 19.5mm / 3.90 * 2.69 * 0.77in
Item weight: 100g / ounce
Package size:
Standard configuration: 125 * 85 * 40mm / 4.92 * 3.35 * 1.57in
High configuration: 210 * 150 * 50mm / 8.27 * 5.91 * 1.97in
Package weight:
Standard configuration: 168g / 5.93ounce
High configuration: 243g / 8.57ounce
Packing List (standard configuration):
1 * 2in1 Oscilloscope Signal Generator
1 * Clip
1 * Cable
1 * Guideline
1 * Lanyard
OR
Packing List (high configuration):
1 * 2in1 Oscilloscope Signal Generator
1 * Clip
1 * Cable
1 * Connector
1 * P6100 Probe
1 * Guideline
1 * Lanyard