24-Hour Mechanical Timer provides simple, convenient automation control for your hardwired devices or using 15-minute interval push pins. With 96 times off /on set 15 min for varied routines, the timer allows schedules throughout the day. Simply rotate timer's dial clockwise until pointer on face of dial points to the current timer, period (or periods) you want the appliance turned on, then push down all segments that fall on or within that period.
Features:
24-HOUR TIMER -- This timer provides daily control, and with the convenient override switch (OFF, AUTO and ON), you can interrupt the timer cycle when not needed. This timer can help you reduce operation of electrical devices, saving you energy and money.
15-MINUTE INTERVALS -- The push pin segments around the dial each represent 15 minute periods. And there are 96 operations per day for you to set accommodates varied schedules, ultra convenient for precision setting.
SIMPLE OPERATION -- To program, simply the period(s) you want the electrical device turned on, and push down the push pins between that period. Then rotate the inside dial clockwise until points to the current timer.
NON FAILURE -- Included a Nickel metal hydride which can lasting for 3 years. As the timer switch switch on, built-in will automatically, the timer will be full of after 3 days of continuous switching.
WIDE APPLICATION -- 24-Hour mechanical timer for control , CFL, and halogen bulbs or other hard-wired devices, it is practical to lower consumption of street , billboard, neon , etc.
Specification:
Working Voltage: 100-240VAC general
Frequency: 50Hz/60Hz general
Drive Modle: motor type
Blackout Compensation: 300H(operation 20℃）
: Poor reading 30s(operation 25℃)
Action : ±3 minutes (Not including initial to adjust error)
Cycle: 24 hours
Consumption: AC 1W; AC 2W
Output Contacts: SPST
Capacity: Resistance load 15A
load 10A
Inductivloade 12A
Motor load AC110.750W AC220V.1500W
Setting : Minimum setting unit 15 minutes
Minimum setting 15 minutes
NO.of on/off operation 96operations/day
Ambient Operating : -10℃- 50℃
Ambient Operating Humidity: less than85%
Installation: Din Rail/Fix/
Item Size: 110*83*45mm/4.33*3.27*1.77in
Packing List:
1 * Mechanical Timer
1 * User Manual
Features:
24-HOUR TIMER -- This timer provides daily control, and with the convenient override switch (OFF, AUTO and ON), you can interrupt the timer cycle when not needed. This timer can help you reduce operation of electrical devices, saving you energy and money.
15-MINUTE INTERVALS -- The push pin segments around the dial each represent 15 minute periods. And there are 96 operations per day for you to set accommodates varied schedules, ultra convenient for precision setting.
SIMPLE OPERATION -- To program, simply the period(s) you want the electrical device turned on, and push down the push pins between that period. Then rotate the inside dial clockwise until points to the current timer.
NON FAILURE -- Included a Nickel metal hydride which can lasting for 3 years. As the timer switch switch on, built-in will automatically, the timer will be full of after 3 days of continuous switching.
WIDE APPLICATION -- 24-Hour mechanical timer for control , CFL, and halogen bulbs or other hard-wired devices, it is practical to lower consumption of street , billboard, neon , etc.
Specification:
Working Voltage: 100-240VAC general
Frequency: 50Hz/60Hz general
Drive Modle: motor type
Blackout Compensation: 300H(operation 20℃）
: Poor reading 30s(operation 25℃)
Action : ±3 minutes (Not including initial to adjust error)
Cycle: 24 hours
Consumption: AC 1W; AC 2W
Output Contacts: SPST
Capacity: Resistance load 15A
load 10A
Inductivloade 12A
Motor load AC110.750W AC220V.1500W
Setting : Minimum setting unit 15 minutes
Minimum setting 15 minutes
NO.of on/off operation 96operations/day
Ambient Operating : -10℃- 50℃
Ambient Operating Humidity: less than85%
Installation: Din Rail/Fix/
Item Size: 110*83*45mm/4.33*3.27*1.77in
Packing List:
1 * Mechanical Timer
1 * User Manual