Thompson's 10 Year Roof Seal
Thompsons High Performance Roof Seal provides
10 years of roof protection and performance under extreme conditions. Once
applied, it forms a highly durable elastomeric coating, which cures to form a
flexible membrane, resistant to splitting and cracking over time. Furthermore
the membrane acts as a protective shield against harmful UV rays and allows any
trapped moisture to evaporate whilst keeping exterior moisture out.
Highly flexible coating that outperforms
bitumen-based products. Resists cracking during expansion and contraction.
Rainproof in 6 hours. No primer required. Will last up to 10 years.
Spec
High performance elastomeric coating for
repairing and weatherproofing roofing materials
Elastomeric formulation flexes with the natural
movement of the roofing material
Added light stable pigments protect against
U.V. radiation
Advanced formulation - rainproof in 6 hours
Out performs traditional bitumen coatings
Size
1L
2.5L
4L
Coating & Finishes
Drying Time |
Dries
in 6 Hours |
Coating Finishes
Coverage |
2
sqm per litre |
Label Info 3:
Precautionary Statements |
P103
Read label before use.P102 Keep out of reach of children.P101 If medical
advice is needed, have product container or label at hand. |
Label Info 4:
Supplementary Label Info |
Contains
1,2-benzisothiazol-3(2H)-one and reaction mass of 5-chloro-2-methyl-2Hisothiazol-3-one
and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. |
Manufacturer Guarantee |
1
Year Guarantee |
Pack Size |
1 |
Pieces in Pack/Case |
1 |
Product Type |
10
Year Roof Seal |
Resistant Type |
UV
& Weather-Resistant |
Suitable Application |
Suitable
for Roofing |
Instructions
Preparation: Give the surface a decent
scrub with a stiff bristle brush to remove any dust or dirt. Repair any
structural faults, if needed. Cut open any old felt blisters and make sure any
ponding water is dry before securing the felt with tacks. Fill any cracks and
level any depressions in the roofing felt.
Application: On cold, damp days drying
and re-coat times will take longer, so for best results, use on a dry day above
10C. Give the tin a really good stir before & during use. You can apply
this using a brush, roller or soft broom whichever you prefer. Apply in long,
smooth strokes over the area of repair. Wait 6 hours before putting on a second
coat.
Clean
Up: Clean up
your equipment with warm water and detergent.
Terms of Sale
Products
supplied in tins (paints, bitumen etc.) are packaged appropriately in
accordance with courier guidelines. The products being sold are the contents
within the tin and not the tin itself. Tins may arrive dented following transit
and will only be refunded or replaced in cases where the contents have been
compromised or leaked. Dented tins will not be refunded or replaced.
If
it looks from the outside that your parcel may be damaged, please take
photographic evidence immediately on receipt, before opening and email the
photograph. Do not open the parcel where
leakage could cause damage to any other property as contents may have leaked
during transit. We will not accept responsibility for damages to tins or to property
caused by leaking parcels during or after delivery.