A6 SALAMANDER SUPER A-6
CLAY GRAPHITE CRUCIBLE-
FOR NON-FERROUS METALS-

MELTING CRUCIBLE - Morgan MMS

Salamander brand Clay-Graphite Crucible A-6 "Super" a high quality ceramic bonded clay graphite crucible manufactured by plastic forming techniques.

SALAMANDER SUPER crucibles are used to melt various metals, and provide consistent performance in fuel-fired furnaces and medium / high frequency induction furnaces. These smaller sizes are typically used to melt precious metals.

These Clay Graphite Crucibles are made to be used with Non Ferrous Metals.

- QUALITY SALAMANDER SUPER crucibles are manufactured from premium grade raw materials under an ISO 9001:2000 quality management system.

- IDENTIFICATION SALAMANDER SUPER crucibles are colored black except for certain smaller sizes that are supplied unpainted.

- TYPICAL METAL CASTING TEMPERATURE: 1562-2912°F / 850-1600°C

PERFORMANCE CHARACTERISTICS:    
- Clean melting
- Good thermal conductivity
- Good resistance to chemical corrosion
- High refractories

A-6 SPECIFICATION: JETS Product # 0317-106  Salamander Morgan
- Capacity:  19.8 Lbs. – 9 Kilos BRASS
- Height Overall:  6-1/4" - 165mm
- Inside Depth to Center:  5-3/4" – 145mm
- Top Outside Diameter:  5-7/64" – 130mm
- Bottom Outside Diameter:  3-3/4"–95mm

- Crucible Weight:  3.85 Lbs.

 

*Protective Clothing, heat gloves and eye protection must be worn when melting metals.  WORK SAFE *Safety factors must always be the Priority.

Please visit and see  JETS INC.  our ebay Store for FULL LINE of Salamander Crucibles sizes A-1 to A-40, find Wesgo Crucibles, along with a  wide selection of Fused Silica Ceramic Crucibles, and a full range of Melting Supplies and Products… also for all the JEWELERS EQUIPMENT TOOLS AND SUPPLIES.       JETS Inc.  

FRMB 4.12LZ  2X-LB 7.7LZ  6X-27LZ 9x15x18  512  CKSP  Z M P