This Arbor - Spindle is used to hold Wheels with 1/2" arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.

Spindle has a 1/2" arbor hole to work on 1/2" shaft Grinders, Motors or Polishers.   The arbor is made with left hand threading to be used on the LEFT Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws.

Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.

FEATURES: 

·        Precision Quality

·        Machining is done by CNC Equipment

·       Made of Steel and Anodized Black Finish

·        Set of Allen Screw do not protrude above the main shaft of the spindle. 

·        Spindle comes with 2 Steel Machined Washers

·        Left Hand 1/2" x 20 Nut

·        Quality Hardware (Washers and Screws)    

-  Material: Cold Rolled Steel

-  Overall Length:  3-7/16" - 87.3mm

-  Arbor Body Diameter: 7/8" - 22.3mm 

-  Spindle Body Length: 1-9/16" - 39.7mm 

-  Spindle Shaft Length: 1-7/8" - 47.65mm 

-  Arbor Hole: 1/2" - 12.7mm  for Shaft Connection

-  Spindle Shaft Diameter: 1/2" - 12.7mm 

-  Weight:  6.8oz. - 191.5gr

Spindle is made to be used on a 1/2" shaft diameter and on the LEFT Hand Side of Motor with forward direction.

 SHIPPING:  Via USPS FIRST CLASS MAIL 

 NOTE: Visit JETSTOOLS our ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies. JETS Inc.

B8 2X-FRE 16Z  3X-FRE 1.4LZ 412  4X-FRE 1.10LZ  CKSP  Z M P