|
Before
you replace your factory radio with your new aftermarket radio,
make sure you get the same parts a professional would use.
Whether you're installing an Alpine, Blaupunkt, Clarion, JVC,
Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo,
you'll want to get the right parts with the best fit and finish,
get genuine Metra Products.
Some
"SELLERS" say they will send you what is
"available" at the time. They substitute
cheap, poor quality generic products for the Metra Harnesses
and Antenna Adapters (when applicable). Wouldn't you rather
get what you paid for? Don't fall for cheap substitutions
that come in plain plastic bags, don't fit right and should
cost a lot less.
This Complete Radio Install Kit comes with good instructions
on removing the factory radio as well as installing your new
one. A Wire Harness or Interface is included so you don't
have to cut any wires which helps keep your factory warranty
intact.
Factory
Sealed Packaging and 100% BRAND
NEW!
Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall. Unfortunately this new size "DOES NOT" work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available. As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. It is best to talk to the radio manufacturer, or the seller of the radio, should you have any questions regarding an install kit for your new radio.
(Additional
Features and Item Specifics Below)
|
