Please choose one:
Max 1500W 12V AC / 12V DC / 24V AC / 24V DC
Phoenix Wind Turbine Generator System
Package Includes:
Wind turbine Generator, Nose Cone, 3 turbine blades, Hub, all screw & bolts |
Certification: CE, RoHS and ISO 9001:2000 |
Environment friendly~Environment friendly~
Installation Reference - not to scale - for reference only
(Inverters, batteries, controller, solar panels are not included in this listing. )
Connection Overview:
The Wind Generator will generate DC power and is able to charge 12V batteries directly. Note: the 12V Batteries above are not included.
If your home or farm is connected to the power grid, on windier days you may be able to sell excess power generated by your wind turbine to your utility. At other times when the turbine cannot generate all the power you need, you would buy power from the grid. This concept is called net metering.
Even if net metering is unavailable, you might be able to reduce your power bills by using the electricity generated by wind turbines, and become less dependent on your utility.
Since wind speed increases with height, increases to the tower height can mean enormous increases in the amount of electricity generated by a wind turbine.
Generator Specification:
|
Body Material |
Aluminium
|
|
Rotor Diameter |
120cm (47 inches) |
|
Starting Wind Speed |
3m/s (7 mph)
|
|
Rated Wind Speed |
12.5m/s |
|
Survival Wind Speed |
45m/s |
|
Voltage |
24 AC
|
|
Rated Power |
550W
|
|
Maximum Power |
650W |
|
Weight |
7.5kg |
|
Mount |
1.5 in schedule 40 pipe 1.9 in (48 mm) outer diameter |
|
Blade Specification:
|
Material |
Nylon 6.6 + Carbon Fiber (<20%) |
|
Length |
59.7cm (23.5 inches) |
|
Width (base) |
12.7cm (5 inches ) |
|
Weight (per blade) |
166g, 6oz |
Features:
- Incorporates highly efficient, true airfoil
- Manufactured using a precision injection molding process that produces blades of exceptional consistency |
|
|
Nose Cone Specification:
|
Material |
Plastic |
|
Diameter |
140 mm |
|
Height |
90mm |
|
Mounting |
Locks on Hub
|
|
Thickness |
3mm |
|
Weight |
80g |
Features:
- Reduce wind resistance
- Eliminates vortexes
- Greater stability
- Neighbor Friendly
|
|
|
Performance Comparison:
|
|
|
With Nose Cone
- Smooth Performance
|
Without Nose Cone
- Air current spins into tiny vortexes |
|
WARNING !!!
Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a
person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products.
NO OPERATING COST
GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE
|
Max 400W 12V AC / 12V DC / 24V AC / 24V DC
Item is located in our USA / Canada warehouse . We will ship the product to your location with either USPS / UPS / Canada Post. Tracking will be available within 4 business days after ordering.
**Canadian buyers are required to pay GST/HST.
Everything in the picture is included
Connection Overview: The Wind Generator is connected to the 3 Phase Rectifier, which changes the Alternative Current output by the generator to Direct Current (AC to DC). Electricity generated by the wind turbine are then stored to batteries. Note: the 12V Batteries above are not included.
If your home or farm is connected to the power grid, on windier days you may be able to sell excess power generated by your wind turbine to your utility. At other times when the turbine cannot generate all the power you need, you would buy power from the grid. This concept is called net metering.
Even if net metering is unavailable, you might be able to reduce your power bills by using the electricity generated by wind turbines, and become less dependent on your utility.
Since wind speed increases with height, increases to the tower height can mean enormous increases in the amount of electricity generated by a wind turbine.
Generator Specification:
400w 12V AC, 24V AC, 24V DC ,Wind Generator
12V DC Wind Generator
|
Body Material |
Aluminium
|
|
Rotor Diameter |
117cm
|
|
Starting Wind Speed |
3m/s (7 mph)
|
|
Rated Wind Speed |
12.5m/s |
|
Survival Wind Speed |
45m/s |
|
Voltage |
12 V or 24 V |
|
Rated Power |
300W
|
|
Maximum Power |
400W |
|
Weight |
5kg |
|
Mount |
Not included | |
Blade Specification:
|
Material |
Carbon Fiber |
|
Length |
58cm (23 inches) |
|
Width (base) |
12cm (4.5 inches ) |
|
Weight (per blade) |
210g |
Features: - Incorporates highly efficient, true airfoil - Quiet performance with minimal vibration - Manufactured using a precision injection molding process that produces blades of exceptional consistency | |
Nose Cone Specification:
|
Material |
Plastic |
|
Diameter |
135 mm |
|
Height |
90mm |
|
Mounting |
Locks on Hub
|
|
Thickness |
3mm |
|
Weight |
80g |
Features: - Reduce wind resistance - Eliminates vortexes - Greater stability - Neighbor Friendly
| |
|