Octopus Glue - Liquid Optically Clear Adhesive (LOCA) for Digitizer / LCD Outer Glass Lens Repair


Package Contents
  • 10 ml Octopus Glue - LOCA stored in an amber UV light resistant syringe 
Compatibility
  • All smartphone digitizer / lcd outer glass lens. This includes: IPhone 4, 4S, 5, Samsung Galaxy S, S2, S3, Note I, Note II, LG Nexus 4, etc.
What is Octopus Glue?
Octopus Glue is Liquid Optically Clear Adhesive (LOCA) specifically formulated for bonding the outer touchscreen glass to the digitizer in a smartphone display assembly.  Octopus Glue is the optimum choice for bonding screen glass to digitizers. It's unique formula improves and maximizes the optical characteristics of the device and offers the easiest application with out the need for expensive tools and machines.
Why Octopus Glue?
  • Super Low Viscosity - 1400 (MPA.S)
    Super low viscosity means that Octopus Glue is not very thick and flows very easily. Not only are air bubbles less likely to occur with Octopus Glue, but they are also easier to remove. Octopus Glue's super low viscosity also means that you can get the job done with less glue than with generic LOCA formulas. Using a thinner layer of glue also results in increased optical performance of the repaired device. Ask about other generic LOCA's viscosity values, they will be most likely over 2,000 to 5,000.
  • High Light Transmittance > 99% @175 um
    Octopus Glue improves the viewing experience by increasing contrast ratio and minimizing quality loss due to reflection. Its unique formula also results in lower haze and resists yellowing more than generic LOCA formulas.
  • Hardness - 25A
    Octopus Glue's 25A hardness increases the display's overall strength and extends the screen assembly's life by making the display more resistant to heat, moisture, and temperature changes. 
  • Excellent Gap Filling
    Octopus Glue fills small scratches on the digitizer surface that may occur when removing old adhesive.
  • Solvent-free
    Octopus Glue is a solvent-free and eco-friendly formula.
  • 100% Money back satisfaction guarantee  
How to use Octopus Glue?
  • Apply 0.5-2 ml to the center of the digitizer in a line. Octopus Glue requires only 50% to 80% of the glue needed when using generic LOCA formulas. Slowly place the glass lens onto the digitizer. Cure the glue with UV light for 3-5 minutes.
  • Recommended Glue Amount:  
         
    • iphone 4: 0.5ml
      •    
    • iphone 5: 0.7ml
      •    
    • Galaxy S: 0.8ml
      •    
    • Galaxy S2: 1ml
      •    
    • Galaxy S3: 1.3ml
      •    
    • Galaxy S4: 1.4ml
      •    
    • Galaxy Note 1, 2: 1.7ml
      •    
    • LG Nexus 4: 1.3ml
      •