Plugs into Select GM: Pontiac, Chevrolet Radio
Wiring Harness Connector - Connect Factory Power/Speakers to a
Aftermarket stereo radio without cutting factory plug. This set has one connector with two rows of 12 pin locations and one constant power lead with a fuse tap. NOTICE: This harness will bypass all Factory Radio Features such as chime and radio delay off features.
Plugs
into Standard Factory Harness and has 8" color coded leads. All wiring
has Electronic Industries Association: standard color codes match most
aftermarket stereos. Each wire is stamped with wiring location for easy
installation. Customer 800 Help Line. Full 1 year warranty.
Note: A 12 volt accessory switched wire is not present in the
factory radio wiring harness. A red 12v accessory switched lead with a fuse
tap is provided with this harness to tap into the vehicles existing fuse
box. Simply find a fuse that shows 12 volts when the key is switched on,
remove fuse and reinstall with fuse tap... without cutting into a wire. You may also access a 12v acc wire usually at the bottom of the steering column but will need to splice in the wire.
FITS: CHEVROLET 2005-2006 COBALT, 06-06 EQUINOX, 2004-2006 MALIBU, PONTIAC 2005-2009 G6, 06 TORRENT