This is for three "300" numbered emblems for the Chrysler 300. THE GRILLE IS NOT INCLUDED. The largest emblem is for the front of the grille, its the same size as the standard OEM Chrysler emblem. The second emblem is smaller, and just sticks on top of the rear trunk emblem. The third emblem is a tiny steering wheel emblem that you can stick over the one on your steering wheel. You can be the first in your area to have a 300 with a Bentley grille with all 3 matching emblems!
These are aftermarket domed self-sticking emblems composed of two layers of the highest quality automotive graphic grade vinyl. The graphic vinyl is manufactured by Universal Products out of Goddard, Kansas. These are handmade from jet black vinyl, metallic chrome vinyl, and a layer of clear epoxy domed over the top. This domed epoxy gives a nice, clear depth to them. Please allow for various imperfections, as these are handmade. I do my best to pick out the best items to ship.
The bigger one is the same size and shape as the stock emblem on the 2005 - 2010 Chrysler 300 grille. The measurements are approximately 2 3/4 of an inch long by 1 13/16 of an inch tall for the front grille emblem, and about 1/16th of an inch thick. The smaller emblem is for the trunk and is about 2 7/16 inches long and 1 5/8th of an inch tall. Please pay close attention to these dimensions when ordering and make sure they will fit your needs.
These emblems fit the grille that I sell and install and many other grilles that have that standard size hole the same as the original 300 grille. They also look really good on the original grille placed over the original emblem. Most people buy two to place one over the trunk winged emblem to have two matching 300 emblems. These emblems can also be stuck anywhere else on the car, or wherever else you can think of placing them. People are also placing them on the quarter panels next to the wheel well by the hemi emblem, or on the back of the trunk. Use your imagination!
VERY IMPORTANT: BE SURE AND CLEAN THE SURFACE THOROUGHLY WITH A RUBBING ALCOHOL SOLUTION BEFORE APPLYING EMBLEM. OFTEN THESE EMBLEMS WILL BE SOMEWHAT BENT, FOR THE BEST RESULTS, HEAT UP THE EMBLEM WELL WITH A HAIR DRYER SO THAT IT BECOMES VERY HOT AND BENDABLE. TRY TO LINE UP THE EMBLEM RIGHT WHERE YOU WANT IT AND PLACE IT DOWN LIGHTLY BEFORE APPLYING PRESSURE. THESE ARE PRESSURE SENSITIVE EMBLEMS, WHEN YOU GET IT RIGHT WHERE YOU WANT IT, RUB THE MIDDLE DOWN FIRST, THEN GO AROUND THE EDGES WITH A LOT OF PRESSURE. YOU CAN ALSO HEAT UP THE EMBLEM WITH A HAIR DRYER AFTER IT IS IN PLACE AS WELL. Once again,these emblems are domed by hand, so please allow for possible slight imperfections.
They also work on E+G Classic grilles that have the same size hole as the original grille. Grille is NOT included in auction, it is pictured only to demonstrate emblem. This auction is for the domed emblem only, it is not for an emblem that includes the entire wings.
All of these one of a kind "300" emblems are handmade from metallic chrome and jet black vinyl, and covered in a transparent epoxy that gives them a clear domed look. These emblems are totally unique, and only available at The Bling King. These are handmade, and not the other cheap emblems you see all over eBay.
We also sell these emblems with the mesh grille. You can find these items in our store. 
To all of you new customers out there, as well as seasoned eBayers, please take a good look at our feedback. You will see that we have a perfect service record, with honest and ethical customer service, and lightning fast shipping times. This kind of service is hard to find nowadays, and we take pride in how we do business. Shop with us hassle free, where you know you will get what you pay for. Check out my other items!
Many of you may know that one big problem on eBay (especially in aftermarket auto accessories), is very low quality items that are made cheaply at substandard levels. These parts feel very light in weight, and the chrome will usually start flaking off soon after purchasing. You will see these all over eBay at dirt cheap prices.
We are a small business based in Illinois and we also install most of these items ourselves, so we have a good working product knowledge of our auctions. We are not some huge impersonal company that cannot answer your questions or respond to your emails. We check our messages throughout the day, so feel free to contact us at your convenience. We take our own pictures of these items, which we have installed ourselves. That way you can see exactly what you are getting, and also know that it actually fits!
Thank you for your time and interest. Be sure to add The Bling King to your favorites list!
INTERNATIONAL ORDERS: We try to keep our shipping costs as low as possible to you. We have found the U.S. Postal system to be the most affordable and reliable service outside the United States. Please note that we have nothing to do with the extra customs charges your country may charge you upon delivery, and also sometimes tracking numbers do not get scanned in on international orders. We automatically put the customs value as low as we can to help out our overseas customers. Also please allow for an occasional extra 2-4 day delay as we sometimes have our suppliers drop ship items directly to our customers. Since our suppliers DO NOT ship internationally, we would have to wait to receive the item ourselves before shipping overseas.