USAWELD replacement welding gun for some Matco MIG welders. This is equivalent to Matco part numbers 238-155-000 and 4320. This is a direct replacement welding gun with no modifications required. It uses the same tips, gas nozzles, and diffusers as the original gun. Take a close look at the end of the welding gun and notice how the gun connects to the welder and also how the trigger wires connect to the machine - if your machine looks like this, then this gun will fit.
 
 (Color of the handle may vary- from red/black or full black) 

This gun fits the following Matco MIG Welders:
 

WFFC Tote MIG Model 117-055 

WFW1 (1) Model 117-015 

WFW1 (2) Model 117-044 

WFW140 Model 117-059 

WFWM (1) Model 117-030 

WFWM (2) Model 117-038 

WFWMDP Model 117-051 

WFWT Tote MIG Model 117-027

 
This 15' gun handles .030”, and .035” diameter welding wires, and feeds all types of wire including mild steel, stainless steel, and flux-cored. The gun comes standard with a .030" contact tip installed. 

Not only will this gun let you keep more of your hard earned money in your pocket, but we believe this HTP replacement gun is better than the OEM gun as it is a heavier duty gun.  Picture 1 gives you a good overview of the gun. You can see the heavy duty spring in both the handle and where the gun plugs into the machine, which offers a much better support system than the OEM gun. Picture 2 shows a close up of the handle. Our handle has a clean ergonomic design, so it fits in your hand better than the OEM gun. The spring support prevents the cable from kinking where it leaves the gun. Picture 3 gives you a close up of the end of the welding gun where it plugs into the welder. Again, we use a spring support to prevent the cable from kinking. Picture 4 is a close up of the rectangular trigger connector. 


Picture 5 (photo 1) shows you the high quality of this gun. The crimp is insulated to protect the trigger wires from chafing. Picture 6 (photo 2) shows the actual crimp with the insulation removed. You can see the crimp that retains the rubber outer jacket and the copper crimp that secures the copper wires to the brass fitting that carries the welding current. Picture 7 (photo 3) shows a cutaway of the coaxial cable assembly, where you can see the copper wires that carry the welding current, the trigger wires, and the inner tube that the wires are wrapped around. The liner runs through the inner tube, and the shielding gas runs between the liner and the walls of the inner tube. We use the same high quality construction on this welding gun that we use on all of the welding guns which are OEM on HTP MIG welders.

 

The welding gun is complete - no tricks here - it includes the liner, gas nozzle, .030" tip, and the rectangular trigger connection. We have this gun available in a flex neck version as well. If you have a Matco welder and need a part that is not listed, please give us a call.

Go to our store and see all the items we have for sale:

https://stores.ebay.com/welders4less

If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo - we might have just what you need.

Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over 35 years all we have sold are quality welding supplies at affordable prices. Send us a message if you have any questions on our items.


S4320T-15-15H