Feature:
The motor speed controller can easily provide a continuous current of 8A to your DC motor or other DC load.
The circuit also includes the function of digital display whose digital tube display the duty ratio.
Main technical parameters:
Input supply voltage: 6V-30VDC
The maximum output power: 240W
The maximum continuous output current :8A
PWM frequency: 16kHz
Duty Cycle adjustable: 0%-100%
The digital display the duty ratio (Display 0-100)
Specifications:
Item size: 79*42*24mm
Package:
1* speed controller
Operating instruction:
Connect your DC motor (or DC load) to the motor terminals as indicated on the
wiring diagram.
Connect a voltage of 6V-30V DC to the circuit making sure of the correct polarity
of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits.
You can now control the speed of the motor through potentiometer and control the electric
power through the switch.
Important Notes:
An appropriately rated fuse (rated a little higher than the maximum current you expect
to draw) is recommended to ensure safe operation.
The controller is NOT reverse-polarity protected and will be damaged if connect the supply
voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes.