HyperGear rb25det 21u turbocharger 470HP highflow service
Note: You are paying for an overhaul and high flow service for two CT12a Toyota  Soarer 1JZGTE Turbochargers.
 
Service information:
Applied model: Toyota 1JZGTE CT12A turbochargers
Power rating: 500HP as twin
Compressor Specifications: Upsized alloy compressor wheel with factory comp housing machined out.
Turbine housing specifications: Upsized steel turbine wheel with factory  turbine housing machined out.
Waste gate: Internal waste gate upsized.
Bearing type: Journal bearings
 
Warranty:

We back our work with 12 Month  unlimited KM warranty. Warranty voids if failure caused from installation  faults, Oil  starvation or object damages.

 
Service  instructions:

Once purchase is made. Turbocharger has to be either  dropped off in person or delivered to our Po.Box. Turn around time is roughly 5  working days depending on the amount of work required. We can  supply exchange units if required, there will be a cost of a bond.

In some cases the turbocharger might not be suitable for  rebuilding, or if housings are cracked or damaged. You will be informed about it  before services taken place.

 
Service  information:

Factory turbocharger will be stripped, compressor and turbine housings will be machined to suit a brand new core  that has up sized steel turbine wheel and alloy compressor wheel.  Internal  gate will be up sized. All  engineering work are carried out in Australia by qualified Australian engineers.

High flowed turbochargers supports 500BHP, 300rwkws  on pump 98 or 330awkws on E85. it requires working with  programmable ecu and bigger aftermarket fuel system. High flowed turbo maintains  factory drive  ability with a lot more power throughout the rev range.  Aftermarket oil lines, water lines, and oil drain is required working with high  flowed turbos. 

At Hypergear turbochargers, apart from doing engineering work, building  and assembling turbochargers, we work closely with local racers,  drifters, fabricators and tuners collecting first hand data. Providing  better turbo configurations for high performance and reliability  by understanding and compare engines responses to turbocharger  components alterations.  We have rich knowledge in different types  of turbo building and vehicle modifications ready to help and assist,   please feel free to email if you have any service / product related questions in  mind.

 

Dyno reading  attached shown a Toyota Soarer Auto with:
Hypergear high flowed 500HP high flowed CT12A turbochargers
600x300x76mm front mount intercooler
3.5 inches turbo back exhaust with 2.5 inches Y pipes between turbos
Haltech ECU
High flowed injectors with Walbro 255 fuel pump
Factory intake pipe with pod filter. Individual induction pipes will result  better power.
Pump 98 fuel
Final result 277rwkws @ 17psi