MSD Blaster 2 Coil Hi-Performance
Part # 8202
GENUINE MSD
Features
- Improved output coil for electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
- (ballast resistor required for points)
- Alkyd tower with high dielectric properties is less prone to carbon tracking
- 100:1 turns ratio and lower primary resistance produce high voltage output
- Metal canister is filled with a premium grade oil for cooling
- CARB E.O. Approved
- The Blaster Coil is designed to mount in most factory canister coil
mounts.
- It is
recommended to mount the PN 8202 coil in an upright
position.
If you are looking to upgrade your stock coil, or want to compliment the
performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster
Coil line is the right choice. All of the Blaster Coils are designed for
improved spark output! Special 100:1 windings are used to provide
maximum build-up of voltage! These windings are held secure and kept
cool in an oil filled metal canister. The tower assembly is molded of
durable alkyd material due to its high dielectric characteristics while
wide spaced brass primary terminals prevent the possibility of spark.
There are several versions of the Blaster Coil available. All of them
have the same internal specifications, but have different housings or
components. Each Blaster Coil can be used with a stock ignition, Blaster
Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with
electronic ignitions do not require a ballast resistor,
***check YOUR
ignition and manufacturers specifications to determine if a ballast is
required in your application.
Specs :
Emission Code | 1 |
---|
Inductance | 8 mH |
---|
Maximum Voltage | 45,000 Volts |
---|
Peak Current | 140 mA |
---|
Primary Resistance | .7 OHMs |
---|
Product Type | Coil |
---|
Secondary Resistance | 4.5K OHMs |
---|
Spark duration | 350 uS |
---|
Turns Ratio | 100:1 |
---|
Warranty | Through FACTORY ONLY WARRANTY
|
---|
|
|
---|
See our EBAY STORE For Your ENGINE And PERFORMANCE Needs
|
|
---|
|
|
---|