The RU-FNP is the same as RU-FN with PoE The RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. APPLICATION: The RU-FN is an RDL Format-A receiver that connects to a Dante-enabled network. It converts the three Format-A audio pairs to Dante networked digital audio channels. Each network channel corresponds to Pair A, B or C of the Format-A input. The unit converts a fourth input, balanced or unbalanced line-level AUX, to Dante. One front-panel green signal LED corresponds to each of the three Format-A input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module"s location. A Dual-LED VU meter facilitates adjustment of the front-panel AUX input gain control. The AUX input supports the complete range of normal unbalanced and balanced line-level sources. The Format-A input jack provides up to 200 mA of power to connected Format-A senders. Multiple senders may be daisy chained from the Format-A input jack. The RU-FN Format-A input supports the entire range of Format-A senders, making each input pair available for end-user connection on various wall plates, or receiving signals from other equipment using rack-mounted, shelf-mounted or utility Format-A senders. The wide array of Format-A senders provides compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL"s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A sender may be connected near the RU-FN or up to several thousand feet distant. The RU-FN is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-FN and Format-A senders connected to the Format-A input. The RU-FNP is equipped for PoE which powers the RU-FN and the connected Format-A senders. If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding the Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated with the connector, facilitating identification of wiring faults. PoE relies on the use of a PoE enabled network switch. The RU-FNP will reserve power from the switch even while being powered from an external 24 Vdc supply. The RU-FN is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform. Features: - Converts RDL Format-A and Aux Source to Four Dante Network Channels
- Easy Installation with Format-A Connections on RJ45 through CATx Cable
- Format-A Audio Sources from Pairs A, B and C Converted to Dante
- Fourth Dante Audio Channel Fed from Unbalanced or Balanced Aux Line Input
- Front-Panel Gain Adjustment with Dual-LED VU Meter for Aux Input
- Signal LEDs Indicate Audio for Each of the Three Format-A Pairs
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- Powers Remote Format-A Senders through Format-A Input Jack
- LED Indicators Show Network Sync Status
- Normal or Hot-Standby Operation from PoE (Model RU-FNP)
- Compatible with Wide Array of RDL Format-A Active and Passive Senders
- Equipped for Rack Mounting or Surface Mounting
Specifications: | Network Connector: | RJ45 with Link and Speed indicators | | Digital Audio Ethernet Protocol: | Dante | | Transmission Rate: | 100 Mbps | | Sample Rates Supported: | 44.1 kHz, 48 kHz (default) | | Bit Depth Supported: | 24 bits | | Audio Operating Levels: | -18 dBFS = +4 dBu | | Format-A Input: | RDL Format-A RJ45 | | Format-A Signal Pairs Used (3): | A, B, C | | Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) | | THD+N: | < 0.1% | | Noise below -4 dBu: | < -75 dB | | CMRR: | > 90 dB (50 Hz to 120 Hz, any input pair) | | Crosstalk: | < 80 dB (20 Hz to 20 kHz) | | Headroom above +4 dBu: | > 18 dB | | AUX Input | | Input: | Balanced, detachable terminal block | | Input Impedance: | > 20 kO | | Input Level for +4 dBu: | -16 dBu to +12 dBu, +22 dBu maximum | | Frequency Response: | 20 Hz to 20 kHz (± 0.75 dB) | | THD+N: | < 0.1% | | Noise below -4 dBu: | < -75 dB | | CMRR: | > 60 dB (50 Hz to 120 Hz) | | Crosstalk: | < 80 dB (20 Hz to 20 kHz) | | Headroom above +4 dBu: | > 18 dB | | Indicators (11): | Power In (1); Power Out (1); Audio Signal LEDs (3), AUX Dual-LED VU Meter (2), Network Sys and Sync (2), Ethernet Link and Speed (2) | | Power Connections (2): | Power Jack: Detachable Terminal Block | | Ambient Operating Environment: | 0° C to 40° C | | Power Requirement: | 24 Vdc at 100 mA plus connected loads, or PoE (RU-FNP) | | PoE (RU-FNP): | Class 0, IEEE 802.3af | | Dimensions: | 5.8" (15 cm) W; 1.7" (4.3 cm) H; 5.2" (13.2 cm) D | | Package Type: | Cardboard Box | | Package Dimensions: | 6 x 6 x 2.625 in. | | Shipping Weight: | 1.61 lbs. (RU-FN); 1.61 lbs. (RU-FNP) | | WEEE weight: | 1.35 lbs. (RU-FN); 1.35 lbs. (RU-FNP) | | Tariff code: | 8517.18.0050 | | 
Low Cost 
