Size 45 (1 1/8"/28mm) Cover Button Tool

This is for 1x New Size 45 (1 1/8"/28mm) Fabric Cover Button Assembly Tool (mold and pusher) used especially with the cover buttons sold in our store. The assembly tool is necessary to assemble your fabric covered buttons and each size button requires a different size tool.

You can do it! See how easy it is with one of our step by step tutorials in the pictures above (picture #3).

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

For size reference, cover buttons are available in the following sizes:

  • Size 20 (1/2 inch / 12 mm)
  • Size 24 (5/8 inch / 15 mm)
  • Size 30 (3/4 inch / 19 mm)
  • Size 36 (7/8 inch / 23 mm)
  • Size 45 (1 1/8 inch / 28 mm)
  • Size 60 (1 1/2 inch / 38 mm)
  • Size 75 (1 7/8 inch / 48 mm)


Cover Button Tips:

  • These Cover Buttons are not recommended for upholstery, leather, vinyl, or other fabrics which are better served by using brass and teeth-style upholstery buttons.
  • These Cover Buttons do not need and will not work with a mechanical press. They are made to be formed with the matching sized silicone Cover Button tool that we offer. Simply choose "Add Tool" from the drop-down menu and the correct sized tool will be added to your order.
  • The size of the fabric circle for each Cover Button size should be approximately twice the diameter of your button blank. If you would like a matching sized reusable plastic circle template, simply choose "Add Template" from the drop-down menu and the correct sized tool will be added to your order.
  • When the circle of fabric and Cover Button Cap are snugly situated in the clear base of the Cover Button tool, flip the tool over and double-check the positioning of your fabric. If it has a pattern, you will see a preview of how the button will form and can make adjustments to the fabric before you install the back.
  • You may want to add a dab of E6000 or comparable adhesive before installing the Cover Button Back as a precaution to ensure a permanent hold.
  • Save your fingers: Tip #1 - Use the backside of a permanent marker or comparable item on the smaller sized Cover Button Caps to press them into the clear base of the Cover Button tool.
  • Save your fingers: Tip #2 - Take a flat piece of wood and use it to apply even downward pressure on the pink plunger of the Cover Button installation tool when installing the back.  Not so much pressure that you flatten the button, just until it pops into place.
  • To remove the Cover Button from the clear base once it has been formed, bend the mold slightly and push up from the bottom to pop out the button.


Notes to US buyers:

* If you buy a large quantity of items, we reserve the right to upgrade your shipment method at no additional cost to you.
* Delivery is guaranteed on all shipments.  If your item is taking longer than you had hoped, please contact us. 

Notes to buyers from International, APO, FPO, and US Territories:

* We will not declare your item as a gift; it is not.
* We always fill out a customs form.  The final value of the auction will be the stated value on the customs form.
* USPS Airmail and Global Priority mail have no tracking or delivery confirmation options.
* Delivery confirmation is not available to APO, FPO, and US Territories.
* In general, USPS Global Priority Mail arrives sooner than USPS Airmail, but it is not guaranteed.
* Delivery is guaranteed on all shipments.  If your item is taking longer than you had hoped, please contact us.  Some countries have widely varying delivery times due to customs and other circumstances beyond our control.  Please be patient if your item seems to be taking too long.