Orders are shipped by Priority Mail.

****BEST DEAL ON EBAY for Cornhole Decals**** Our Vinyl is made of high quality media with air release for bubble free application. Cornhole wraps - complete top board full color Digital Printed Decals 24.5"x48.5".

Antler, wood, camo, scope, hunting

1 set = 2 prints

DESCRIPTION

We us 3M vinyl with air release technology.  Cornhole Board Wraps are high quality images printed on 3M vinyl.  Printed in high resolution with eco-solvent inks, the most durable inks in the industry.  3M offered outdoor durability compared to other competitors low grade vinyl. All cornhole board decals are printed ½ " oversized at 48.5" high x 24.5" wide.  This allows some flexibility in your board build in case the wood is off slightly in size and for each graphic to be trimmed for an exact fit after installation.

You can choose from the drop-down, laminated or non-laminated set.

Description of Laminated Wraps or Non-Laminated Wraps 

Laminated Cornhole Board Wraps have a clear gloss with added UV protection over laminate applied to them after they are printed.  This provides a smooth, durable surface that guards against scratching and fading.  Cornhole wraps that are laminated save time during installation because they do not require a clear coat after application. Non-Laminated Cornhole Board Wraps require 2 to 4 coats of clear after they are installed. Even with Laminated you can still poly over them if you like for added protection and durability. 

SHIPPING

The package will include: 

·        1 set is (2 Cornhole Board Wraps)

·        Installation Instructions (step by step)

·        Ongoing Support regarding preparation or installation

All Cornhole Board Decals ship within 12 to 48 hours USPS Priority Mail.

QUESTIONS:

1.  Can I mix and match my order with two different designs?
     Yes.  If you would like to order two designs, just purchase one of the sets and leave a note at checkout indicating which designs you would like.  Then, you will be shipped one of each. 

2.  Can the wraps be installed to bare wood?
     Yes a smooth clean surface.  The wraps must be installed to a smooth, finished surface.  It is suggested to finish your boards with semi or gloss paint, NO clear coat under the wraps only on top after installation, you can use stain before applying the wraps. Make sure it’s completely dry before installation wraps.

3.  Is the hole pre-cut?
     No.  The hole is to be trimmed after the wraps are installed.

4. Trim Edges: It is recommended to trim back the edges from the sides from the boards to help limit the amount of damage to a print if you hit the sides of your boards by accident. This will damage the wood but keep your prints from taking the hit.