HDMI signal related features:
 - 225MHz HDMI receiver
 - Adaptive HDMI equalizer, HDMI transmission distance up to 30 meters
 - Support for custom EDIDs
 - Support for extracting InfoFrame information for AVI / Audio / SPD / MS / VS / ACP / ISRC1 / ISRC2 / Gamut
 - Support full colorimetric method
 - Supports 8/10/12-bit color depth
 - Supports color sampling of RGB 4: 4: 4, YCbCr 4: 4: 4, YCbCr 4: 2: 2
 - Supports 8-channel IES60958 / IEC61937 standard audio streams
 - Support for extracting audio format information and channel status data
 - Support for extracting video timing information
 - Support for extracting 3D format information
 - Support for extracting time codes for Sony / Canon DSLR
Output format:
 - Output signal resolution up to 2048 × 2048 pixels
 - Output frame rate can support up to 120fps (the actual output frame rate may be limited by PCIe bandwidth, for higher picture resolution, or more than 1280 × 1024 resolution,

   the actual output frame rate may be limited by onboard video processing hardware Of the pixel clock, that is 1920 × 1080 resolution can reach the maximum frame rate of 80fps)
 - Supports 4: 2: 0 8-bit output format: NV12, I420, YV12
 - Supports 4: 2: 2 8-bit output formats: YUY2, YUYV, UYVY
 - Supports 4: 4: 4 8-bit output formats: V308, IYU2, V408, BGR24, BGR32
 - Supports 4: 4: 4 10-bit output formats: V410, Y410
 - More output formats are supported via the Pro Capture SDK (based on DirectKS version)
Video processing functions:
 - Using two video processing lines, each processing bandwidth of up to 180M pixels / s
 - Fully up to 10-bit video processing
 - Video cut
 - V video zoom
 - V video to interlaced

     *Two lines are staggered

     *Two mixes

     *Only the top field / Only at the end)

  - Video aspect ratio conversion

     *Video aspect ratio conversion

     *Automatically or manually select the output video aspect ratio

     *Three aspect ratio transformation modes: ignore (anisotropy), crop, fill (up or down or left and right fill black)
 - Video color space conversion
     *Automatically or manually select the input color space and quantize the range
     *Automatically or manually select the output color space, quantization range and saturation range
     *Support RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color space
     *Support limited or complete quantification range
     *Supports full, full and extended saturation of gamut
 - V video frame rate conversion
 - Video OSD synthesis
    *Support PNG format OSD screen (maximum frame size is 2048 × 2048)
    *Support the dynamic loading of the RGBA OSD screen via the SDK
One machine multi-card:
 - Support multiple cards installed in the same system
 - Onboard DIP switches, from 0 to F, provide 16 numbers for numbering cards
 - When the DIP switch is set to 1, the system hardware device tree will display: "01: Pro Capture AIO", and so on
 - The video audio device displayed in the user software will also contain the card number
Multiple output stream:
 - For any input signal can output any of the output stream
 - You can set the output stream for each cut, aspect ratio, color space, resolution, frame rate, to interlaced mode, color adjustment, OSD and other attributes.
Supports ultra low latency:
 - 64 lines of video delay
 - Through the SDK to complete part of the notification mode
Timestamp and A / V sync:
 - 100ns high-resolution clock based on hardware implementation
 - The audio frame (192 audio samples) and the video frames are marked by the hardware clock to reach the timestamp k of the acquisition card
 - The hardware clock can be synchronized across the card (via the SDK)
Video output SG-DMA:
 - In the PCIe 2.x system, each DMA bandwidth of up to about 400MB / s
 - In the PCIe 1.x system, each DMA bandwidth of up to about 200MB / s
 - Support for automatic detection of Intel GPU block image surface
 - Support for AMD GPU DirectGMA
 - Supports GPUDirect for Nvidia GPUs
SDK:
 - Pro Capture SDK for DirectShow provides developers with a way to quickly integrate capture card extensions (Windows)
 - Pro Capture SDK for DirectKS provides developers with maximum flexibility and highest performance (Windows)
Windows driver customization changes:
 - All options can be managed through the registry level three: all equipment, specific models and specific equipment
 - Video, audio, cross-filter names can be customized through the registry
Firmware upgrade:
 - Multiple cards in the same system can be upgraded at the same time
 - When the capture card is not occupied without the need to turn off the power to complete the card upgrade
 - Security upgrades, power failure during system upgrades, system crash, etc. The firmware is automatically restored to the factory version (firmware only for version 1.21 and later)
LED indicator:
The status of the LED shows the operating status of each way: Idle, the input signal is locked, the memory is wrong, or the FPGA is configured incorrectly
size:
 - Full height PCIe x4 expansion card
 - 112.15mm x 102.92mm (without PCIe baffle)

Payment