Description:

Name: Swimming pool water quality detector
Model: PC-101

Chlorine Test - Adjustment Point: Before using for the first time, adjust the tester to the test pool water or hot spring water in the following order: 1. Test the swimming pool water or hot spring water with the traditional liquid test tool; Chlorine readings to spare (1.5PPM); 3. No need to adjust the PH. To find the adjustment point of the tester: A. Place an AA 1.5 V battery (positive up) in the battery compartment of the handle. B. Hold the tester in one hand and the other with a test stick. C. Insert the cleaned metal rod into the water to the black position. D. gently stir the water with metal rods. E. When the metal rod is kept in the water, keep the front knob of the table in the CL direction to no longer move. And then slowly turn right until the pointer points to the position of the result measured by the traditional liquid test tool (eg 1.5). F. Remove the test stick from the water. Be careful not to move the knob. The pointer will slide to the right, in A and E between a letter to stop. This letter is the point of adjustment. Note: Each time you test chlorine, you must first adjust the table to the "adjustment point".

Test pH: The recommended chlorine content for swimming pool water or hot spring water is 7.2 to 7.8 A) Let the test stick stay in the water and adjust the knob to the beep in the pH direction (the battery must be removed when reading the pH). B) Wait until the pointer stops swinging after a pH reading. C) Gently dry the test bar and insert it into the slot next to the tester.
The company has always been to "high-quality, high efficiency, new technology, new management" for the purpose. "Innovation and development, quality first, customer first" business philosophy, to provide customers with creative and innovative spirit of all kinds of products. We emphasize team innovation, every step of the development process is the team collaboration, creativity and computer use of the results of cooperation.

Test chlorine content: Recommended water content for swimming pool water or hot spring water 1.2 to 1.7 ppm A) Adjust the pointer to the "adjustment point" position. B) One hand holding the tester, the other hand holding the test bar, the metal rod into the water to the black position. Wait until the pointer stops swinging after reading. C) Let the test stick stay in the water and continue to perform the pH test according to the instructions.

1. Swimming pool, sauna and spa essential tools
2. The ideal tool for simply measuring the pH and C12 values ​​of water
3. No chemical composition, no need to use the speculation to measure
4. Safe measurement of chlorine content within the scope of the level: 1.2-1.7ppm
5. The pH level of the safety measurement range: 7.2-7.8
6. Battery: Use 1 AA battery

Custody method:
To extend the life of the pool tester PC-101 and to ensure accurate measurement,
Please note:
1, when not in use, please turn the knob to the closed position (to the PH direction can not be moved so far).
2, placed in a cool, dry place, to avoid direct sunlight.
3, do not immerse the test rod in addition to swimming pool water and hot spring water outside the other liquid.
4, regularly check the battery is sufficient - the tester uses an "AA" 1.5 V alkaline battery

Package included:

1*PC-101 Swimming pool water quality detector