HEKA Jumbo XXL egg-incubator for:
The continuously and reliably turning of the eggs
is necessary for successful brooding - at least
2-3 times per day in the 1st phase of breeding
(hen eggs: 18 days --> then 3 days hatching). If
you choose your HEKA-Incubator with half-auto-
matic egg-turning, you don't have to turn every
single egg, but you just have to push and pull
the trays. Inside the tray, the eggs lay on fluted
wooden bars, which theirselves lay on the left
and on the right on rubber-strap. By pushing
or pulling the trays, the bars of the tray turn
and so will also turn the eggs.
With electronic regulation temperature is set by
the silver adjusting knob and it's shown on the
angle-thermometer on the right side of the
incubator. Highly suitable for export-markets,
because these electronics make it impassible for
oscillations in power-supply, and all electronic
components can be exchanged easily in case of
damage.
The processor-control-system provides a
pleasant "Plus" of comfort in handling. The
brooding-temperature can be adjusted in one-
tenths of a degree - both set-temperature actual
temperature are shown simultaneously. Further,
an alarm is included. You set the alarm-
temperature digitally - if this temperature is
reached, the alarm-control-light flashes up
(acoustical alarm on enquiry).
A double thermostat brings an even higher level of safety
to your incubator. If the main thermostate should allow the
temperature in your incubator to rise too high because of
technical failure, the double thermostat switches off the
heating and prohibits damage to the eggs. This is not
really necessary with a high-class HEKA-incubator - but it
is a pleasant addition. In all incubators with electronic
regulation there is installed a membrane-regulation as
double thermostat, in all incubators with processor-
control-system the double thermostat is integrated in this
control-system. The value for the double thermostat is
preset by us - you don't have to reprogram any values,
but you can just start brooding, when you get your
HEKA-incubator.
If you brood waterfowl, it is absolutely necessary to cool-down the
eggs once a day up from the ~11th day (up to the hatching-
phase). With incubators without cooling timer you have to do this
by opening the door for 20-30 minutes. If you choose your HEKA-
incubator equipped with a cooling timer, you don't have to operate
this cooling by yourself (with the risk to forget closing the door),
but the incubator itself deactivates the heating for your desired/set
time, so that the temperature inside the incubator decreases. It is
essential, that all other functions of the incubator remain enabled -
only the heating is disabled.
The lower insulation value of the single glazing is advanta-
geous in export-markets with hot surrounding temperatures,
because the incubator can lose temperature through the
door. But the disadvantage of steaming windows at higher
values of humidity, persist.
In middle- and north-european countries, the insulated
glazing is definitely the right choice. The insulation value is
much better, whereby the power-consumption decreases.
Further, insulated glazing begins to steam up just up from
~80% humidity - beyond those values, which are needed
normally.
2 years warranty.
Dimensions: Width 78 cm, Depth 88 cm, Height 160 cm,
Weight ca. 170 kg, Power consumption in 24h., ca. 2,8 kW
Beigelegt wird auch unser aktueller HEKA-Brutgeräte Gesamtkatalog (124 Seiten voll mit: Brutgeräten, Aufzuchtboxen, Geflügelzuchtartikeln, Drahtgitter, Weidezaun und Überspannungsnetzen, Getreidemühlen, Schlachtzubehör, Kaninchenzuchtartikeln, Taubenartikeln, Vogelartikeln, Hundeartikeln, Präparaten für Geflügel, Tauben und Nager, Schädlingsbekämpfungsmitteln, Fachbüchern und Tierfallen).
Further we produce the following incubators within this series "HEKA Standard"
Further
we offer the complete range of poultry-supply - since more than 30
years. With HEKA, you can always be sure, to get the best-available
quality - fast and reliable !
All mentioned items are
available at Ebay - or can be offered at Ebay shortly. For this - or for
any other questions, you are always welcome to contact us: by mail or
by phone: +49 5244 1718
Your Team from HEKA-Brutgeräte