Product Details

MCP2515 EF02037:
Introduction:
CAN-BUS is a common industrial bus because of its long travel distance,
medium communication speed and high reliability.
It is commonly found on modern machine tools and as an automotive diagnostic bus.
This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI
interface and MCP2551 CAN transceiver to give your Arduino/Seeeduino CAN-BUS capibility.
With an OBD-II converter cable added on and the OBD-II library imported,
you are ready to build an onboard diagnostic device or data logger.
Features:
Implements CAN V2.0B at up to 1 Mb/s
SPI Interface up to 10 MHz
Ariduino/ Freaduino Completely compatible
Standard (11 bit) and extended (29 bit) data and remote frames
Industrial standard 9 pin sub-D connector
Two receive buffers with prioritized message storage
Operating voltage: DC5-12V
Size: 78mmx53.5m
Applications:
Industrial control
Car control field
Package Include: 1 x ElecFreaks EF02037 CAN-BUS Shield medium communication speed high reliability
MCP2515 Black:
 
CAN Controller Area Network is an abbreviation, is the ISO international standardization of serial communication protocol. CAN's performance and reliability has been recognized, and is widely used in industrial automation, marine, medical equipment, industrial equipment and other aspects.
Compared with the traditional 485 bus, CAN bus has many advantages. The Arduino CAN Shield as using MCP2515 CAN controller, TJA1050 CAN transceiver as (similar to 485 in the MAX485 transceiver chip), and provide detailed information and reference library Arduino platform, can be installed directly on the Arduino platform CAN communication between the plates, for those who want self-CAN bus students or engineers, is a good choice.

fully supports CAN2.0 protocol specification, the maximum transfer rate of 1Mb / s 2 an indicator LED
2 user buttons
power, receive, send, interrupt indication LED
1 an industry standard SUB-D connector
external expansion UART and IIC interface
high-speed SPI interface speeds up to 10MHz
Operating voltage: 4.8V - 5.2V
Working current: about 30 mA
Size: 65 × 53mm
Net weight: 55 g
Package include：1 x MCP2515 Can Bus shiled board module arduino-Compatible
MCP2515 TJA1050:
1, support CAN V2.0B specification, the communication speed 1Mb / S
2,0 to 8-byte data field
3, the standard frame and expand the frame and remote frame
4. 5V DC power supply module, SPI interface protocol control
5,120 ohm termination resistors. Impedance matching, ensure drive capacity,
long-distance data transmission against signal radiation
6, module size: 4.4cm x 2.8cm screw hole center spacing 23mm x 38mm
7, the working current: typ. 5mA, 1 microamp standby current. Except the power indicator.
8, the working temperature: Industrial grade to 85 ℃ -40 ℃
Package Include: 1 x Arduino MCP2515 CAN Bus Module TJA1050 Receiver SPI Module
MCP2515 SOP-18:
Description :
100% brand new & original
P/N:MCP2515-I/SO.
Supply Voltage Range:2.7V to 5.5V.
Current: 10mA.
Pin:18Pins.
Package:SOP-18.
Package Include：1 x Original SMD IC MCP2515-I/SO MCP2515 CAN Bus Controller SPI SOP-18
  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

DataCaciques