Product Details
ZVS Generator Module
100% Brand new and High quality
This is Assembled Board
Size: 74mm x 77.8mm
Input Voltage: DC 12V-30V
Power Requirement: Less than 12V≥5A, Above 15V≥15A
Operating Frequency: 30KHz-50KHz adaptive
Secondary Parameters: 5T + 5T
About the length of the discharge arc: Input voltage 12V/5A, the high voltage discharge arc distance is about 1-2CM. The greater input voltage and current increases, the greater output power, the longer discharge arc distance, when input the maximum 30V/10A, distance can up to above 5CM. If the arc is too short, please check the input power is sufficient.
About Power: Power output circuit depends on your input power, if you only 30W power supply, even if you want to be a 200W ZVS, is can not up to the output of 100W or 200W, so the input power must be adequate, power = voltage x current !
Input Voltage/Current Output Voltage Max Power
12V/5A About 10000V 60W
24V/10A About 20000V 200W
Package Included:1 x Assembled ZVS Tesla Coil Driver Board
Acrylic Case For ZVS Generator Module
Shell for the transparent acrylic, shipping shell are spare parts, please pro note, because the assembled shell hollow, bad delivery, easy to crush.
Delivery of both sides of the physical have a layer of protective layer, after receipt of the goods before the installation of the protective layer to tear and then assembled.
Shell shipping list:
(1) transparent acrylic shell 1 set
(2) set of screws:
30MM double through copper pillars 4
M3 * 10 screws 9
ZVS Generator Module+Case
Package included:
1*Assembled ZVS Tesla Coil Driver Board
1*Acrylic Case (DIY Kits)
1. size: 74 mm * 77 mm
2. input voltage: 12V-30V recommended 24V
3. Power supply requirements: less than 15V≧ 5A; 15V or more≧15A
4. Operating frequency: 30KHZ - 60KHZ
5. Secondary parameters: 5T+ 5T
6. Use military 1.6mm double board, four fixed 3 mm hole.
7. Mixer tube to add new field with a 30mm large heat sink, greatly improve the stability and life!
8. Low density component placement, better heat dissipation, Especially the capacitance, the majority of ZVS plate will be 2 capacitance placed side by side!
9. Extra power line tin, current-carrying capacity more strong!
10. Metal film resistor power, high precision, small Temperature drift!
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.