Incubating-system with a total capacity of up to 33.000 hens-eggs per month,
consisting og:
- 9x incubator HEKA Favorit-Olymp 2200
- 2x hatcher HEKA Favorit-Olymp 2200/S
- 40 additional trays for permanent operation (inserting 2.200 hens-eggs every 2 days)
- completely mounted and checked - just plug to power- (230V) and water-mains
- floor space required (totall): 8,3m x 2,6m
- monthly capacity of up to 33.000 hens-eggs or 20.000 duck-eggs or
38.500 pheasant-eggs or 45.000 bantam-eggs or 7.000-9.000 goose-eggs or
60.000-80.000 partridge-/quail-eggs
- any time extendable like desired/necessary
Incubator and hatcher have the same basic measurements and thus can be
placed oppositely in a row of each 5-6 devices. This leads to a minimum
floor space required of just 8,3m-length. With the low depth of the
devides and each two doors for one device in width you just need a
minimum of 2,6m (this space already is enough even to open all doors
even of opposite devices).
Every 2 days you fill one incubator HEKA Favorit-Olymp 2200 with 2.000
(eggs horizontally placed in the trays) up to 2.200 (eggs vertically
placed) hens-eggs. For hatching (day 19-21 for hens-eggs) you bring the
eggs/trays into one of the hatchers HEKA Favorit-Olymp 2200/S. This is
done alternating, so that after the hatching-phase of 3 days you have
one day time to let the hatched chicken dry in the hatcher and clean the
hatcher, before it is needed for the next eggs/hatching. Thereby,
bringing the eggs from the incubator to the hatcher is designed most
easily and efficiently. You just take out the 20 trays (with eggs) of
the incubator and push them onto the hatching-trays in the hatcher. If a
capacity of 2.000 hens-eggs per incubator has been enough and you
placed the eggs in the trays horizontally, you have to do nothing else.
If you needed a higher capacity of up to 2.200 hens-eggs per incubator
and placed the eggs vertically, you have to take out one egg of each row
and put it directly into the hatching tray, so that you can bring the
remaining eggs into horizontal position for hatching.
Because (like described above) the eggs remain for hatching on the
incubating-trays, in this total package also 40 additional trays are
included. Thus you can immediately put fresh eggs into the incubator,
when you have brought them into the hatcher.
Subsequently we describe the high-quality, fully equipped configuration
of the incubators HEKA Favorit-Olymp 2200. The hatchers differ from the
incubators just by missing turning-mechanism and a bigger height of
191cm. Instead of this, 20 plastic hatching-trays are included, which
can be pushed into the hatcher separately and onto which the aluminium
incubating-trays of the incubator are just pushed separately.
HEKA Favorit-Olymp 2200 Large-Capacity-Incubator with rocking-egg-turning-mechanism for:
- ca. 2.200 hen-eggs or
- ca. 3.000 bantam-/pheasant-eggs or
- ca. 2.800 eggs of miniature breeds or
- ca. 1.800 duck-/turkey-eggs or
- ca. 840 goose-eggs or
- ca. 4.500 partridge-/quail-eggs
- standard-tray-size is suitable for hen-/bantam-/pheasant-/duck-/turkey-/minitature breeds-eggs
- of course you can also choose different kind of trays !
High-class HEKA-large-capacity-incubator. At this type we extend the
high-class equipment of the series "HEKA-Favorit-Olymp by a water
cooling system. This meets the requirements of our customers in hot
countries of Southern Europe, Africa or South-America. Thus, excellent
success in breeding is also guaranteed in rooms, which are not
air-conditioned. The easy-to-clean and hygienic plastic-cabin avoids
damages caused by humidity. Just enjoy the best success in breeding,
guaranteed by our HEKA-microprocessor-control-system. This precise
control-system controls and shows digitally in great illuminated
paragraphs: Breeding Temperature, Cooling Temperature,
Alarm-Temperature, Humidity, Cool-Down Temperature, Cool-Down-Time.
Subsequently we explain the high-class standard-equipment of this incubator.
1. Fully-automatic egg-turning
In
incubators of the series Favorit-Olymp, the turning of the eggs is
executed by a rocking-mechanism, which is popular especially at breeders
of waterfowl. The aluminium-trays (powder-coated) lay in
aluminium-frames, which are rocked forward and backward by 4 strong
motors. With the perfected HEKA-rocking-mechanism and its high-quality
motors it is not necessary to place the motors unaesthetically behind
the cabin. The turning takes just a few minutes - the number of daily
turnings is preset to 12 - but can changed by you very easily.
2. Fully-automatic humidification
All HEKA-incubators with automatic humidification
are equipped with an absolutely fully-automatic
humidification. Regularly we include a water-
canister, which is the water reservoirs for the
humidification. It's also possible to connect the
incubator directly to your water line. Gladly we
then adjust your machine for this higher water
pressure - a short message is enough. A float
valve regulates the water supply out of the
canister or out of the water line. Everytime while
heating (continuously at heating up; in short impulses, if set-temperature is reached),
a water-heating gets acticated, which heats the water and evaporates it. A failure-free
and reliable technique for best success in brooding.
3. HEKA-microprocessor controls
The centrepiece of this incubator is the micro-
processor control developed by HEKA.
Regarding precise control mode as well as
reliability (failure rate under 0,1% in the first
5 years) this controls probably stands head
and shoulder above all other producers'
controls. Temperature, humidity and cooling-
down can be programmed with 4 buttons
without the slightest effort.
4. Insulated glazing
All incbators of the series "HEKA-Favorit-Olymp"
are serially equipped with double glazing. The
insulation value is much better in comparison to
single glazing, whereby the power-consumption
decreases. Further, insulated glazing begins to
steam up just up from ~80% humidity - beyond
those values, which are needed normally.
5. Water-Cooling-System
Our water-cooling-system avoids overtemperature inside the incubator,
which could be caused by too high surrounding temperature (permanent or
short-term). Especially in hot countries of Southern Europe, Africa and
Southern America until now it had been absolutely necessary to place
the incubators into an air-conditioned room. A missing or defective
air-conditioning had been a big risk factor. With our
water-cooling-system we now offer the perfect solution. If the set
cooling-temperature is reached, the water-cooling-system is activated by
the microprocessor-control and lowers the temperature rapidly down to
(e.g. slightly below) the incubating-temperature. The
water-cooling-system then deactivates automatically and the superb
HEKA-microprocessor-control ensures again the absolute precise
temperature-regulation. Of course the incubators needs to be connected
to your (cold-)water-mains for the operation of the
water-cooling-system.
Accessories (each incubator)
The incubator is completely equipped with all the accessories, which are
needed. Included is the interior lighting of the incubator, 20 trays of
your choice, a water canister and a detailed manual.
Further, reasonable accessories, which are not included, could be a
candling lamp for checking eggs on fecundity; more trays/hatching-trays
(if needed) and the right disinfectant for cleaning/disinfecting the
incubator after hatching (we recommend: Amo-Des).
Technical Details (each incubator)
2 Jahre warranty.
Dimensions: Width 137 cm, Depth 58 cm, Height 178 cm (hatcher: 191 cm height)
Weight ca. 160 kg, Power-consumption in 24h.: ca. 2,2 kW