Dual Digital Colour Charge Air Temperature Gauge with Fast Refresh Rate

A great gauge to have within your vehicle. With the 1 second refresh rate cycle, this will accurately enable you to monitor your charged temperature after your intercooler and to see how efficient your cooling system is as and when boost levels are increased.

This is an ideal solution for dyno run setup to keep an eye on cooling efficiency as it isn't the greatest compared to the open road. 

In general, the cooler the compressed air the better power gains you will receive from your engine.

You could use the gauge to read the initial ambient temperature before the turbo or supercharge and after the intercooler to get a true comparison of temperature differences.

Gauge can be used on other automotive application like motorbikes and easily be installed and powered using a small 9 volt battery. 

Oil and Chargecooler Water temperature 

Oil and chargecooler water can be managed using this neat gauge using the sensor probe to gain an insight what temperatures your engine is running at. 

Specs

·         Temp Range: -20°C- 100°C 

·         Water-proof probe

·         About 1 Second Refresh Rate

·         Dual Probe wire length: 1 metre ( Can be extended easily)

·         Probe size: L: 20mm x W: 3mm

·         Power wire length: 55cm( approx)

·         Unit dimension: 4.5cm*2.5cm*1.5cm( approx)

·         Display in °C

·         Display Colour: Red/Blue

·         Power voltage: 9 - 28 volts



4m Probe Extension Wire

See link below.

https://www.ebay.co.uk/itm/192358387477


Thanks for viewing