With 1.75TB SAS HDD's In Good Condition, Full Working Order Includes: - 1 x Dell EqualLogic PS6110x Virtualized iSCSI SAN Storage Array
- 2 x Control Module 14 Orange Label Each With:
- 1 x 10GbE SFP+ Port
- 1 x 10GBase-T Port
- 1 x 10/100Mb Management Port
- 4Gb Cache
- Support For RAID 5,6,10 And 50
- 19 x 73GB 10k SAS Hard Drive
- 3 x 73GB 15k SAS Hard Drive
- 1 x 72GB 10k SAS Hard Drive
- 1 x 72GB 15k SAS Hard Drive
- 2 x 700w Power Supplies 0R0C2G
- 1 x Front Bezel
Specification:
Product Configurations- Storage Controllers
Dual controllers with 4GB non-volatile memory per controller
Hard Disk Drives Twenty-four (24) 10K SAS (or SAS SED) hot-pluggable hard disk drives
Drive Capacities 2.5” 10K SAS drives available in 600GB, 900GB, and 1.2TB (900GB also available in SAS SED)
System Capacities Up to 28.8TB
Technical Highlights- Volumes
Up to 1,024
Snapshots 512 per volume / up to 10,000 total per group
Volume Connections Up to 1,024
Host Protocol Any standards-compliant iSCSI initiator
Operating Systems Supported
Microsoft® Windows Server® including Hyper-V® VMware® ESX Server™ Red Hat® Enterprise Linux® (RHEL) SUSE® Enterprise Linux® (SLES) Oracle® Linux Oracle® Solaris™ IBM® AIX® HP-UX Mac OS® X Citrix® XenServer® Novell® NetWare® RAID Support RAID 5, RAID 6, RAID 10, and RAID 50
10GbE Network Interfaces Management network: One 100BASE-TX per controller Interface ports: One 10GBASE-T with RJ45 and one 10GbE SFP+ for fibre or twin-ax copper cabling
TCP Network Support IPv4, IPv6 core support
Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group.
Reliability- Redundant hot-swappable controllers with vertical port sharing
Hot-swappable disks and power supplies
Enclosure Monitoring System- Automatic spare configuration and utilization
SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive
Management- SAN Headquarters multi-group performance and event monitoring tool
Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support
Security- CHAP authentication
Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support
Notification Methods- SNMP traps, e-mail, syslog
Power- AC voltage: 100-240 VAC ±10% single phase
Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 700 W
Chassis- Height: 2U / 87 mm (3.42 inches)
Width: 446 mm (17.57 inches) Depth: 546 mm (21.50 inches) Weight: 24.1 kg (53.0 lbs)
Packaged physical: Length: 851 mm (33.50 inches) Width: 616 mm (24.25 inches) Depth: 508 mm (20.00 inches) Packaged weight: 53.32 kg (117.30 lbs)
Rack Support ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
Environmental Operating Conditions- Temperature range: 5° to 40°C (41° to 104°F)
Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
|