Brief Introduction:
- This dual-layer module is a wireless & UART solution provided by Sure Electronics. It integrates a 16-bit microcontroller (PIC24FJ32GA002) and a 2.4GHz RF transceiver-MRF24J40, which works at ISM band 2.405-2.48 GHz and comforms to IEEE 802.15.4? Standard. Besides, this transceiver supports ZigBee?, MiWi?, MiWi P2P and proprietary wireless networking protocols. This UART-ready module is especially suitable for short distance (10 meters) wireless communication application in which peer-to-peer or point-to-multipoint communication requirement is needed. Moreover, its low current consumption makes it almost one of the most cost-effective solutions.
Features:
- UART-ready speed up integration
- Miniaturized Size
- PCB-based antenna
- On-site configuration
- Highly sensitive
- P2P & point-to-multipoint communication
Specifications:
- Power supply:
- I/O:
- Output high level: >2.9V
- Output low level: <0.3V
- Input high level: >2.7V (<5V)
- Input low level: <0.3V
- RF:
- Transmission power: 0dBm
- Receiving sensitivity: typical -91dBm
- Working frequency band: 2.4G ISM
- Communication channel: 8 channels
- Communication distance: 10m
- UART interface:
- Baud rate: 9600bps
- Start bit: 1 bit
- Data bit: 8 bits
- Check bit: 0 bit
- Stop bit: 1 bit
- Packet size: <64 bytes
- Packet transmission interval: >80 mS
- Communication mode: half duplex
Applications:
- wireless sensors' network
- wireless monitoring and control
- building automation
- smart home
- Hydrological monitoring
- Other wireless communication
Package Contents:
- 2.4G Wireless UART Communication Module ×1
- 8-pin header ×2
Documents:
Keyword:
|