3HP Compressor Electric Motor 2.2KW 2800rpm 2 Pole 240v With Trip Button !!

Electric Motor Spec Sheet for 2.2kw 2 pole 240v Single Phase Twin Capacitor with Pulley and Lead 

Frame 90L
Output (KW 2.2) (HP 3)
Poles 2
Full Load Speed 2810RPM
Voltage Input 240V
Frequency 50Hz
Full Load Current 13.57A
Format Capacitor start and run, High Torque,
Load Torque Starting 7.48Nm
Starting Current 75A
Current Noise Level 84dB (A)
Weight 16.7 Kgs
Degree of Protection IP55
Ambient Temperature 40°C
Performance According to IEC 60034

Price includes 1x A Section Pulley with 24mm bush from 1 off  the following sizes:
SPA67 SPA71 SPA75 SPA80 SPA85 SPA90 SPA95 SPA100 SPA106 SPA112 SPA118 SPA125 SPA132 SPA140 OR SPA150, Note a SPA90 pulley will measure 95.5mm with a tape so to get the correct measurement measurement just take of 5.5mm.See attached image for further information. 

Installation
All electric motors should be installed by a qualified electrician and suitable overload protection fitted to prevent the motor from overload

Mounting Variations as below
B3 Foot Mount Only B35 Foot and Flanged Large Flange
B34 Foot and Flanged with Small Flange with Internal Threaded Holes

All Motors have detachable Multi mount feet so can be easily removed and transferred to enable the terminal box with capacitors fitted to be located on either side or on top of motor as standard if you are restricted for height.

Feedback
Please don’t leave us negative feedback we are here to help and sometimes late deliveries etc. are out of our control, Please contact us with any issues and we will do our best to sort them as we are a trusted seller with many years’ experience and thrive on the product quality and support we offer and continue to offer.