New Cisco Aironet Power Injector For 1100, 1130AG, 1200
AIR-PWRINJ3 48V 2x RJ45
Model Number: AIR-PWRINJ3

New
In Unsealed Original Packaging

Included:
  • 1 x New Cisco Aironet Power Injector For 1100, 1130AG, 1200 AIR-PWRINJ3 48V 2x RJ45
Overview
The Cisco Aironet Power Injector products increase wireless LAN deployment flexibility of Cisco Aironet Access Points and Bridges by providing an alternative powering option to local power, inline power-capable multiport switches, and multiport power patch panels.

The single-port Cisco Aironet Power Injector combines 48-VDC power (supplied by the external power supply) with the data signal, sending both to the Cisco Aironet Access Point or Bridge.

The Cisco Aironet Power Injector Media Converter converts fiber media signals to Category 5 Ethernet media and combines the data signal with power for delivery to the access point or bridge. The power injector accepts 48-VDC power from either the barrel connector of the local power supply or an alternative 48-VDC power source.

The power injectors provide up to 15 W (depending on the Cisco power supply model) over the unused wire pairs of a Category 5 Ethernet cable, supplying enough power for a distance of 328 ft. (100 m) on the Cisco Aironet 350, 1100, 1200 Series Access Points and the Cisco Aironet 350 Series Bridges.


The Cisco Aironet Power Injector provides both power and data to a connected access point or bridge. 
The device serves the following functions:
  • It provides Category 5 Ethernet media to the access point or bridge.
  • It uses the unused wires in an Ethernet cable to supply inline 48-VDC power to an access point or bridge.

The power injector provides an easy and economical way to provide data and power to an access point or bridge located in areas where power is not available. 
The power injector is used with the following Cisco Aironet wireless products:
  • 350 series access points and bridges
  • 1100 series access points
  • 1200 series access points


Manufacturer's Specification

Specification
Power Injector (AIR-PWRINJ3)

Electrical

Input voltage: 48-VDC, 15W

Connectors

2 RJ-45 (Cat 5 Ethernet) 
1 barrel


Wire pairs used

Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive).

Specification 
Power Injector (AIR-PWRINJ-FIB)

Dimensions

5.4 in. x 2.1 in. x 1.3 in. (13.7 cm x 5.3 cm x 3.3 cm)

Stacking restrictions

Do not stack. Do not bundle the power injector and AC power adapter.



Specification
  • Type: PoE Injector
  • LAN Connection: RJ-45 10/100BASE-TX
  • Device Connection: RJ-45 10/100BASE-TX
  • Max Cat 5 cable length: 100 m from switch to device

LEDs 
  • 2 - Power Status
  • Device Connectivity

Power
  • Input voltage (supplied by external power supply) 48VDC +/- 10%, 18 watts
  • Output voltage: 48 VDC
  • Input current: .380A
  • Output current: .320A

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£19 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by
purchasers in the EU (excluding UK) who are VAT registered
TH 198332 - 4