1 set of replacement filters with following :
1 x Sediment Filter 1 micron Dirt/Rust remover
- Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems.
- Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
- Meets FDA requirements for food and beverage contact.
- No leachable or extractable material to contaminate outflowing water.
- Long life and increased dirt holding capacity.
- No surface binders to reduce flow and increase change-out frequency.
1 x GAC 10 inch Coconut shell Carbon Filter
- Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems.
- Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
- Thick Wall Coconut Base Carbon Filter Media - 100% coconut shell carbon Designed For maximum contact between the water and carbon.
- filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
- Operation Temperature: 40°F to 125°F
1 x CTO Carbon Block Filter
- Size 9 7/8 inch x 2.5 inch Fits most standard 10 inch size housings and most reverse osmosis systems.
- Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.
1 X Reverse Osmosis Membrane
- 100 GPD R.O. Membrane at 60 PSI
- We Suggest to change your membrane every 2 year
- To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals).
2 X Refillable Inline Mixed Bed Deionization Filter (Double Ended).
- Clear Housing, Refillable Cartridge (Double Ended)
- Filter Media: Mixed Bed ion exchange resin
- Max Flow: 0.5 GPM
- Max Pressure: 125 PSI
- Max Temperature: 100°F
- Dimensions: 11 inch x 2 inch
- Inlet/Outlet: 1/4 inch FPT
- Weight: 13 oz
Total 6 filters, each individually wrapped.
