All new in boxes with One Year Warranty Renishaw PH10MQ Motorized Probe Head, Renishaw PHC10-3 Probe Head Controller (which has now replaced the PHC10-2) and Renishaw TP20 Modular Touch Probe System with 3 Probe Modules.
PH10T or PH10M can be shipped for the same price. PHC10-3 supports both RS 232 and USB communication.
Please specify which modules you would like for the TP20, Low force, Medium force, Standard force, or Extended force in any combination.
All components in this sale are new and in unopened boxes with full factory warranty.
All items will be ordered from the factory for you which is why we have a 5 day handling time and this item does not show our TOP RATED PLUS SELLER BADGE.
Please contact us should your application require custom cables for your installation. We also offer partial refunds for probing that you have replaced with this system.
If you were to purchase these items at full retail price you would pay $29804.00
The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.
All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance.
The PH10M can carry long extension bars and complex probes such as SP25M or TP7M. The highly repeatable autojoint allows rapid probe or extension bar changing without the need for re-qualification.
Length | 117 mm |
Width | 62 mm |
Weight | 645 g |
Probe mounting | Autojoint (multiwire) |
Head mounting | PH10M shank to suit CMM |
Suitable controller | PHC10-2 PHC10-3 |
Repeatability of position | 0.4 µm (0.00002 in) specified at a distance of 62 mm |
Total no. of positions | 720 |
Max recommended drive torque | 0.45 Nm |
Maximum extension bar | 300 mm (11.8 in) using PAA3 extension |
The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself. This option provides a neater and shorter probe mount, with only the A axis protruding from the quill.
Length | 73 mm |
Width | 80 mm |
Weight | 730 g |
Probe mounting | Autojoint (multiwire) |
Head mounting | Direct to quill |
Suitable controller | PHC10-2 PHC10-3 |
Repeatability of position | 0.4 µm (0.00002 in) specified at a distance of 62 mm |
Total no. of positions | 720 |
Max recommended drive torque | 0.45 Nm |
Maximum extension bar | 300 mm (11.8 in) using PAA3 extension |
The PH10T is similar to the PH10M, except that it features an M8 thread probe mount in place of the autojoint.
All M8 threaded probes, such as TP20 and TP200, and extension bars fit directly onto the head. The PH10T is fully compatible with all of Renishaw's stylus and module change systems.
Length | 103 mm |
Width | 62 mm |
Weight | 645 g |
Probe mounting | M8 thread (2 wire) |
Head mounting | Shank to suit CMM |
Suitable controller | PHC10-2 PHC10-3 |
Repeatability of position | 0.4 µm (0.00002 in) specified at a distance of 48 mm (equivalent to a TP2 and PS1R stylus) |
Total no. of positions | 720 |
Max recommended drive torque | 0.45 Nm |
Maximum extension bar | 300 mm (11.8 in) using PEL4 extension |
PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:
The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.
Length | 180 mm |
Width | 440 mm |
Height | 44 mm |
Weight | 1.5 Kg |
Data transmission | RS232 or USB |
Current Consumption (at 240V) | less than 1 A |
PSU electrical ratings | Supply voltage: 100-240 V ± 10% Frequency range: 50/60 Hz Power consumption: 49 W max. Transient voltages: Installation category II |
Input connectors | 15 way 'D' |
Power supply | 24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor |
Probe output connectors | 7-pin DIN or 9-way 'D' type |
Maximum cable length |
|
Hand held control unit | HCU1 only |
The TP20 is a compact 5-way, or 6-way, kinematic touch-trigger probe system. The two-piece design, comprising probe body and detachable stylus module(s), connected using a highly repeatable magnetic kinematic coupling. This provides the facility to change stylus configurations either manually or automatically without the need for requalification of the stylus tips, thereby giving significant time savings in inspection routines.
Modules offering a range of trigger forces allow the probe performance to be best matched to the measurement task. A set of probe extensions is also available, as is a 6-way module. The stylus mounting thread accepts styli from the Renishaw M2 range.
The TP20 system is easily retrofitted and is compatible with existing touch trigger probe interfaces, extensions and adaptors.
The system components are:
Sense directions |
All modules except 6W 6W |
±X, ±Y, +Z ±X, ±Y, ±Z |
Suitable interface | PI4-2, PI7-2, PI200, UCC | |
Pre-travel variation |
LF SF / EM1 / EM2 MF EF 6W |
±0.60 µm (± 0.000023 in) ±0.80 µm (± 0.000032 in) ±1.00 µm (± 0.000039 in) ±2.00 µm (± 0.000079 in) ±1.50 µm (±0.000058 in) |
Unidirectional repeatability |
LF / SF / EM1 / EM2 MF EF 6W |
±0.35 µm (± 0.000014 in)
±0.50 µm (± 0.000020 in) ±0.65 µm (± 0.000026 in) ±0.80 µm (± 0.000032 in) |
Repeatability of stylus changing |
MCR20 Manual |
±0.50 µm (± 0.000020 in)
±1.00µm (± 0.000040 in) |
Stylus range | M2 | |
Mounting method | M8 thread |
A range of seven, application specific, probe modules is available and are identified by coloured caps.
Module | Application | Trigger forces | Stylus lengths | |
---|---|---|---|---|
SF - Standard force | Suited to the majority of applications |
XY: 0.08 N Z: 0.75 N Stylus: 10 mm |
10 - 50 mm GF | |
LF - Low force | Low trigger forces applications - e.g. rubber seals |
XY: 0.055 N Z: 0.65 N Stylus: 10 mm |
10 - 30 mm | |
MF - Medium force | Where a higher trigger force than standard is required |
XY: 0.1 N Z: 1.9 N Stylus: 25 mm |
10 - 60 mm | |
EF - Extended force | Large stylus assemblies or where vibration causes spurious 'air' triggers |
XY: 0.1 N Z: 3.2N Stylus: 50 mm |
10 - 60 mm | |
6W - 6-way | Measurement in the –Z direction - e.g. undercuts |
XY: 0.14 N Z: 1.6N Stylus: 10 mm |
10 - 50 mm | |
EM1 STD - 50 mm extension | Majority of applications requiring a 50 mm extension |
XY: 0.08 N Z: 0.75 N Stylus: 10 mm |
10 - 50 mm | |
EM2 STD - 75 mm extension | Majority of applications requiring a 75 mm extension |
XY: 0.08 N Z: 0.75 N Stylus: 10 mm |
10 - 50 mm |
The MCR20 probe module changing rack is designed to securely hold stored modules for rapid automatic changing, and to protect them from airborne contaminants which may be present within the working environment.
The MSR1 module storage rack safely holds up to six modules and eases the operators task where manual changing is performed, aiding productivity.
This is by far the best price you will find on a Renishaw PH10 motorized probe PH10-2 probe head controller and TP20 touch probe system with 3 probe modules of your choice.
Why pay retail prices when you can purchase new with full factory warranty from Metrology Parts.
Purchase with confidence from Metrology Parts a Paypal verified retailer.
If what you order is not what you receive you will be refunded the full purchase price for this sale.
Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw product needs.
If you have any questions feel free to contact us. With 30 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support.