|
You are bidding on a New Pull from System
Tyan S2881G2NR Dual AMD CPU Hi-Performance Thunder K8SR Server Motherboard Note: This listing is for motherboard only. Nothing else.
Benefits and Applicatios
Utilizing two AMD Opteron™ processors, the Thunder K8SR (S2881) is the
best choice for 1U/2U rackmount servers. The Thunder K8SR (S2881)
offers competitive features such as eight DIMM slots for up to 16GB of
Registered DDR400 memory, two independent PCI-X buses, onboard ATI®
RAGE™ XL graphics, and Serial ATA with RAID support. With strategically
located components, the Thunder K8SR (S2881) allows maximum airflow
across the motherboard for ideal temperature inside the chassis.
Specifications
Processor • Dual µPGA 940-pin ZIF sockets • Supports up to two AMD Opteron™ processors • 128-bit DDR dual-channel memory controller • (integrated in CPU) • Supports Single and Dual Core processors
Chipset • AMD-8131™ HyperTransport™ PCI-X Tunnel • AMD-8111™ HyperTransport™ I/O Hub • Winbond™ W83627HF Super I/O ASIC • Analog Devices ADT7463 Hardware Monitoring IC
Memory • 128-bit DDR memory bus • Eight 184-pin 2.5-Volt DDR DIMM sockets • Supports up to 32GB of Registered DDR • Supports ECC type memory modules • Supports DDR 266/333/400 • Supports Single/Dual/Quad Rank mem. modules • Supported with Opteron 246 CPU’s or higher
Expansion Slots • Two independent 64-bit PCI-X buses • One 100/66/33 MHz (3.3-volt) PCI-X slots - from PCI-X bridge A • One 133/100/66/33 MHz (3.3-volt) PCI-X slot • Total of two usable slots
Integrated I/O • One floppy connector support up to two drives • Two 9-pin serial ports - one connector and one header • One 25-pin SPP/ECP/EPP parallel header • Four USB 1.1 ports (two rear and two header) • One 15-pin VGA connector • PS/2 mouse and keyboard connectors
System Management • Total of nine 3-pin fan headers • Six fan headers with monitoring • One 2-pin Chassis Intrusion header • Temperature, voltage and fan monitoring • Port 80h LED 7-segment display
Integrated Enhanced IDE Controller • Two IDE dual-drive ports for up to four EIDE devices • Supports for UDMA 133/100/66/33 IDE drives and ATAPI devices
Integrated LAN Controller • Broadcom BCM5704C dual-channel GbE LAN - Two RJ-45 LAN connectors with LEDs - Connected to PCI-X Bridge A • Two Front Panel LED headers
|
|
Integrated PCI Graphics • ATI® RAGE™ XL 8MB PCI graphics controller
Integrated SATA Controller • Silicon Image Sil 3114 SATA controller • Supports four-ch, SATA RAID (RAID 0, 1, 0+1) • Total of four 7-pin SATA 1.0 connectors • Supports up to four Serial ATA150 drives
Integrated SCSI Controller (option) • Adaptec 7902 U320 SCSI controller • Two U320 68-pin SCSI connectors • Connects to PCI-X Bridge A • Adaptec ZCR support through low-profile SO-DIMM Card
Intelligent Platform Management Interface Header • TYAN Server Management Daughter card (optional) supports features listed below via IPMI header (SMDC/TSO Support) • QLogic™ Zircon Baseboard Management Controller (BMC) based on powerful ARM7 technology • Tailored for IPMI highest 1.5 Spec. • Supports KCS and BT styles • Flexible Windows or Linux Management Solution • Supports RMCP and SNMP protocols • Supports ASF standard and EMP • I2C serial multi-master controllers and UARTs • Build-in IPMB connector • Remote power on/off and reset support (IPMI-over-LAN)
BIOS • AMI® BIOS 8.0 on 4Mbit LPC Flash ROM • Supports ACPI 2.0 and SRAT • Supports PXE via Ethernet, USB device boot • SMBIOS 2.3.1, BBS 1.1 compliant • Headless Operation via serial console redirect and remote flash • 48-bit LBA Support
Form Factor • SSI EEB v3.0 footprint (12"x13"; 304.8x330.2mm) - fits many Rackmount chassis • EPS12V/SSI (24pin + 8pin) power connectors • Serial (one) and VGA (one) connectors • Stacked USB 1.1 (two) connectors • Stacked PS/2 keyboard and mouse connectors • Two RJ-45 LAN connectors with LEDs
Regulatory • FCC Class B (DoC) • European Community CE (DoC). | |
|
|
Shipping :
|
|
|
Delivery time normally takes 2-7 business days in the USA depending what carrier you choose. International shipment will take upto 14 working days or longer. For international customer we do not cover any custom fees. It's your responsibilities for any fees associated with your purchase. We keep all the serial #s inhouse for verify returns. PLEASE READ CAREFULLY, DO NOT BID IF YOU DON'T AGREE WITH OUR TERMS! THANK YOU VERY MUCH!
|
|
Payment :
|
|
|
We accept PayPal. PayPal is preferred. Please pay within 3 days of auction closed. We ship to PayPal confirmed address only or your payment may have refunded. All sales are final. For Shipment and tracking # will be send within 24 hours of payment received. Thanks!
| | |