If you need longer pipe than 4 Feet, please see our 5 to 8 Feet length listing.

1/2 Inch to 6 Inch Diameter Clear Schedule 40 PVC pipe, cut to length.  (5 Inches to 4 feet length in this listing)

Pipe diameter is the approximate ID (inside-diameter).  (PVC Pipe Diameters aren't the exact ID of the pipe as you can see below.  This is industry-wide, and not specific to our pipe.  If you are needing a very specific ID, please pay close attention.)

1/2 inch has an ID of 0.602 inch and an OD of 0.840 inch (approx).

3/4 inch has an ID of 0.804 inch and an OD of 1.050 inch (approx).

1 inch has an ID of 1.029 inch and an OD of 1.315 inch (approx).

1-1/4 inch has an ID of 1.360 inch and an OD of 1.660 inch (approx).

1-1/2 inch has an ID of 1.590 inch and an OD of 1.900 inch (approx).

2 inch has an ID of 2.047 inch and an OD of 2.375 inch (approx).

2 1/2 inch has an ID of 2.445 inch and an OD of 2.875 inch (approx).

3 inch has an ID of 3.042 inch and an OD of 3.500 inch (approx).

4 inch has an ID of 4.00 inch and an OD of 4.500 inch (approx).

6 inch has an ID of 6.031 inch and an OD of 6.625 inch (approx).

PVC Schedule 40 Pipe Max PSI rating for the various diameters:

1/2 Inch: 300 PSI @ 73F

3/4 Inch: 240 PSI @ 73F

1 Inch: 220 PSI @ 73F

1-1/4 Inch: 180 PSI @ 73F

1-1/2 Inch: 170 PSI @ 73F

2 Inch: 140 PSI @ 73F

2 1/2 Inch: 150 PSI @ 73F

3 Inch: 130 PSI @ 73F

4 Inch: 110 PSI @ 73F

6 Inch: 90PSI @ 73F

This pipe is manufactured in strict compliance to ASTM D1785.

Pipe has no printing or engraving on it.

Pipe has a bluish tint to prevent yellowing over time from UV exposure. (See pictures)

For use with standard PVC fittings and PVC cement.

The image which shows a flashlight inside is representative of the 2 inch and below diameters, and the image which shows an umbrella inside is representative of the 2½ and above diameters.  Please pay attention to the color and clarity to verify it is suitable for your application.

This pipe should be protected from the sun.  Extended exposure to ultraviolet light may cause discoloration, and the heat may cause warping.

Do not use PVC pipe with compressed air or gas as it can explode and cause shrapnel.

Length variance is +/- 1/16 Inch.

How to cut:  If you need to cut the pipe, you should avoid using a ratchet-style PVC cutter, as that will likely break this pipe.  Instead, use a saw such as a hacksaw, miter saw or radial arm saw, or one of the pipe cutters that you tighten a little, turn on the pipe, tighten some more and turn on the pipe and repeat until the pipe is cut.

Would you like some clear fittings to go with your pipe?  We offer clear Elbows, TEEs, Couplings, Male Adapters, Unions, Ball Valves and Caps

ATTENTION CANADIAN CUSTOMERS:  Orders shipping to Canada are shipped by our choice of eBay International Standard Delivery, Priority Mail International or UPS Standard.  Duties/Taxes may be due on your order upon receipt in addition to possible brokerage fees.  If duties/taxes/brokerage fees are not paid, the shipment may be abandoned or returned to us.  If the shipment is abandoned, you will not receive any refund.  If the shipment is returned to us, any return shipping charges will be deducted from your refund.  Any shipping charges paid are non-refundable.