Smartlock Bypass Module

This module is used to remove, bypass or override the Smartlock anti-theft system used on Ford falcons from 1991 to 1999.

This module will generate the required signal, allowing the engine computer to run independently without the factory BEM (Body Electronics Module) or programmed ignition keys.

It is tycially used when the factory system fails and the engine cranks but doesnt start, or when you have to bang the dash to make the vehicle crank over.

Compatible Models:
- EB2 - ED - EF - EL - XG - XH
- Early AU1 (upto around June 1999 production)
- All equivalent Fairlane + LTD models
- 6 cylinder and V8 vehicles
Free EXPRESS postage Australia wide.
Easy to fit with detailed fitting instructions.
Small size of 40x40x15mm.

You are buying directly from the designer and manufacturer of this product - there will be no issue with technical support or after sales assistance. Each module is individually tested prior to being sold. Failure rate remains 0% even after hundreds being sold over many years.

How do I fit it?

It is mounted near the engine ECU in the LH kick panel. The small size means it can be easily cabled tied directly to the wiring loom to keep it secure.

3 wires need to be connected - the fitting instructions detail exactly which wires from the ECU to connect to, and include color diagrams of the ECU connector to help you.

Ignition power + earth are joined directly.

The signal wire to the ECU is cut and joined to the bypass module (meaning it no longer runs to the rest of the vehicle).

If required, 2 wires are joined at the factory smartlock or BEM module, ensuring the starter relay always works when you turn the key and removing the 'starter cut' feature from the factory system.

This module is what most people need, but there is also a 5-wire version available.
It can be interfaced with a kill-switch or aftermarket immobilizer, and uses the factory smartlock system to prevent the engine starting when you dont want it to.

Disclaimer	All items are sent via express post - either the same or the following business day. Once I have sent it, postage delays are out of my control. This module cannot fix other faults with the vehicle, such as a failed fuel pump or distributer. Please diagnose and confirm that smartlock is the problem before purchase. Returns are not accepted for change-of-mind or if it turns out there was a different underlying problem. Although highly unlikely, if there is a faulty module, a replacement will be sent via Express post.

Disclaimer

All items are sent via express post - either the same or the following business day. Once I have sent it, postage delays are out of my control.
This module cannot fix other faults with the vehicle, such as a failed fuel pump or distributer. Please diagnose and confirm that smartlock is the problem before purchase. Returns are not accepted for change-of-mind or if it turns out there was a different underlying problem.
Although highly unlikely, if there is a faulty module, a replacement will be sent via Express post.

Mr Module - Automotive Electronics Solutions