Dell EqualLogic PS6110X Virtualized iSCSI SAN Storage 2x 10Gb/10GbE Controllers
In Good Condition, Full Working Order
Tested
Includes:
- 1 x Dell EqualLogic PS6110X Virtualized iSCSI SAN Storage Array
- 2 x Control Module 14 Orange Label 594R6 Each With:
- 1 x 10GbE SFP+ Port
- 1 x 10GBase-T Port
- 1 x 10/100Mb Management Port
- 4Gb Cache
- Support For RAID 5,6,10 And 50
- 24 x 2.5" SAS Hard Drive Bays, No Drives, No Caddies Included - we can quote to supply either
- 2 x 700W Power Supplies 0R0C2G
Specification:
- Storage Controllers: Dual controllers with 4GB non-volatile memory per controller
- Hard Disk Drives: Twenty-four (24) 10K SAS (or SAS SED) hot-pluggable hard disk drives
- Drive Capacities: 2.5” 10K SAS drives available in 600GB, 900GB, and 1.2TB (900GB also available in SAS SED)
- System Capacities: Up to 28.8TB
Technical Highlights:
- Volumes: Up to 1,024
- Snapshots: 512 per volume / up to 10,000 total per group
- Volume Connections: Up to 1,024
- Host Protocol: Any standards-compliant iSCSI initiator
- Operating Systems Supported:
- Microsoft Windows Server including Hyper-V
- VMware ESX Server
- Red Hat Enterprise Linux (RHEL)
- SUSE Enterprise Linux (SLES)
- Oracle Linux
- Oracle Solaris
- IBM AIX
- HP-UX
- Mac OS X
- Citrix XenServer
- Novell NetWare
- RAID Support: RAID 5, RAID 6, RAID 10, and RAID 501
- 10GbE Network Interfaces:
- Management network: One 100BASE-TX per controller
- Interface ports: One 10GBASE-T with RJ45 and one 10GbE SFP+ for fibre or twin-ax copper cabling
- TCP Network Support: IPv4, IPv6 core support
- Expansion Option: Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group.
Reliability
- Redundant hot-swappable controllers with vertical port sharing
- Hot-swappable disks and power supplies
Enclosure Monitoring System
- Automatic spare configuration and utilization
- SMART
- Automatic bad block replacement
- Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive
Management
- SAN Headquarters multi-group performance and event monitoring tool
- Serial console
- Ability to configure a separate management network
- SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
- Multi-administrator support
Security
- CHAP authentication
- Access control for iSCSI
- Access control for management interfaces including Active Directory, LDAP, or RADIUS support
- Notification Methods
- SNMP traps, e-mail, syslog
Power
- AC voltage: 100-240 VAC ±10% single phase
- Frequency: 50/60 Hz
- Power factor: 0.98 (minimum)
- Power supplies: Dual 700 W
Chassis
- Height: 2U / 87 mm (3.42 inches)
- Width: 446 mm (17.57 inches)
- Depth: 546 mm (21.50 inches)
- Weight: 24.1 kg (53.0 lbs)
- Rack Support: ReadyRails II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
Environmental Operating Conditions
- Temperature range: 5° to 40°C (41° to 104°F)
- Storage temperature: –40° to 65°C (–40° to 149°F)
- Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
- Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation
- of 10% per hour
- Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
- Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
- Acoustics Category 4: <=7.2 bels at 23C +/- 2C
- Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£1100 excluding VAT
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
CS 220349 dup