The iProtect
1206i is a new class of counter surveillance device. Unlike all typical
searching devices it can detect modern 'hidden' bugs which use such
protocols as Bluetooth and Wi-Fi at a long distance. Such bugs,
especially Bluetooth types, are practically undetectable by common RF
detectors due to their very low transmitted power and special type of
modulation.
The i
Protect DD1206 uses a separate channel with a high,
(2.4/5Ghz) frequency pre-selector to detect and locate
Bluetooth and Wi-Fi with a much higher sensitivity.
The unit also then processes the demodulated signal
in order to identify which protocol has been detected.
In addition the unit can detect all 'classical' bugs
and inspect them for the presence of correlation by
sending sound impulses as well as other digital transmissions
at a standard distance (GSM, 3G, DECT, etc.)
The DD1206 is a sophisticated handheld
radio frequency detection device that incorporates the ability to detect
nearly any type of wireless protocol including digital frequencies such
as Wi-Fi and analog frequencies reaching up to 12Ghz in range. Making
this detection device extremely successful at finding unwanted
surveillance threats are the two different antennas users can deploy and
the demodulation feature which enables the users to hear the sound
signature of the frequency.
Now
up to 12GHz the iProtect
DD1206
The perfect tool in searching
for digital and analogue transmitters in the frequency ranges
·
Main antenna 50MHz –
12GHz Wider coverage, particularly at lower frequencies, has made it
possible to increase the detection distance of a conventional VHF/UHF bug
by 2-3 times, while saving perfect sensitivity at the higher bands (GSM,
Wi-Fi, Bluetooth, etc.)
·
Anntena 2 1.4-2.48
GHz and 4.9-5.875 GHz This is the first
time when an affordable RF detector gets the
microwave log-periodic directed antenna supplied in the standard
set. 2-4 times longer distance to all sources
above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz, Bluetooth,
Wi-Max, LTE High, etc.). The directionality provides easy pinpointing of
a wireless source. Now you not only know that there is a Wi-Fi source,
but can quickly pinpoint it.
·
Increased sensitivity to Bluetooth/Wi-Fi signals
allows the operator to detect wireless sources at distance of 50 cm- 2 m
·
Detects GSM, LTE, Wi-Max Bluetooth, Wi-Fi 2.4GHz
an Wi-Fi 5GHz and RF and wireless video cameras
·
16-segment bar graph indicator providing a wide
dynamic range
·
3 modes: sound, vibration and mixed
·
2 levels of sensitivity (attenuator)
·
Durable metallic body
·
Microprocessor controlled
·
Correlation function discovers FM-transmitters by
the presence of sound is different than other detectors this unit can produce a loop-back effect A
microphone transmitter will pick up the sound and transmit the beep. The
demodulation display will pick up the transmission and flash
simultaneously. Also, when the unit detects other transmission different
sounds will come from the unit depending the
type of transmission it detects.
1 year warranty
|