Repair Kit Intake Manifold And Actuators N: 059129086 AUDI A4 A5 A6 A7 A8 Q5 Q7 2.7 3.0 TDI P2015

For intake manifold with actuator n. 059129086

These code P2015 repair brackets limit the range of motion of the V157 intake flap motor to the same range as when your car was new.

 This prevents the shutter motor from opening or closing too far, which is the cause of the P2015 error code.

These media are also a preventative fix.

Installing the brackets now will prevent problems later.

 With these brackets in place, you won't suffer wear and tear on the mechanism and the trouble code it creates. The repair kit can also clear your TDI error codes P2004, P2009, P2016 and P2017.

The repair kit contains a 2x Pieces which is installed with the original screws in the flap plates. You don't have to drill, replace or modify anything. The repair is completely safe for the engine, and can be removed at any time if necessary. The repair kit can in most cases be installed without having to dismantle the intake manifold (depending on the motor model, disassembly of the actuator may be necessary -

• 4G5, C7, 3.0 TDI 204 HP, CLAA
• 4G5, C7, 3.0 TDI 245 HP, CDUC, CDUC, CKVB
• 4G5, C7, 3.0 TDI 313 HP, CGQB

Audi A7 Sportback:

• 4GA, 3.0 TDI 204 HP, CLAA, CLAB
• 4GA, 3.0 TDI 245 HP, CDUC, CDUD, CKVB, CKVC
• 4GA, 3.0 TDI 313 HP, CGQB

Audi A8:

• 4E, 3.0 TDI 211 HP, BNG
• 4E, 3.0 TDI 233 HP, ASB
• 4H, 3.0 TDI 204 HP, CLAB
• 4H, 3.0 TDI 211 HP,
• 4H, 3.0 TDI 250 HP, CDTA, CMHA

Audi Q5:

• 8R, 3.0 TDI 240 HP, CCWA

Audi Q7:

• 4L, 3.0 TDI 211 HP, BUN, CASB
• 4L, 3.0 TDI 224 HP, CATA
• 4L, 3.0 TDI 233 HP, BUG
• 4L, 3.0 TDI 240 HP, CASA, CCMA, CJGA
• 4L, 3.0 TDI 245 HP, CJGB, CLZB, CRCA

Assembly is very easy and takes approximately 15 minutes. They must be mounted on the throttle valve actuator with the existing screw.

The repair kit contains a 2X Part which is installed with the original screws in the flap plate.

You don't have to drill, replace or modify anything.