Supermicro CSE-819U X10DRU-i+ 1U Server

Chassis Part number:  CSE-819U

Motherboard Part Number: X10DRU-i+

Backplane Part Number: SAS815TQ


In Good Condition, Full Working Order

Tested

Includes:
  • 2 x Intel Xeon Fourteen-Core E5-2680V4 2.40GHz Processors
  • 128GB DDR4 Memory
  • 4 x 3.5" SAS/SATA Hot-Swap Hard Drive Bays With 4 x Empty Caddies
  • Onboard SATA 2.0 & 3.0 RAID (RAID 0, 1, 5, 10)
  • 1 x 1U Ultra Riser based on Intel X540 controller with 4 10Gbase-T ports and 1 internal PCI-E x8 3.0 slot AOC-UR-I4XT
  • 1 x 750W Power Supply PWS-750P-IR
  • 8 x Internal Fans
  • Set Of Rails
Manufacturers Specification:

Motherboard - Super X10DRU-i+
 
Processor/Cache
CPU - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
Dual Socket R3 (LGA 2011)
Cores / Cache - Up to 22 Cores† / Up to 55MB† Cache
System Bus - QPI up to 9.6 GT/s 
Note † BIOS version 2.0 or above is required

System Memory
Memory Capacity - 24x 288-pin DDR4 DIMM slots
Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
Memory Type - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
2666/2400 ECC DDR4 NVDIMM
DIMM Sizes - RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
NVDIMM: 16GB
Memory Voltage - 1.2 V
Error Detection - Corrects single-bit errors
 
On-Board Devices
Chipset - Intel® C612 chipset
SATA - SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI - Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Connectivity - 4x 10GBase-T ports via AOC-UR-i4XT
Intel® X540 10GBase-T
1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics - ASPEED AST2400 BMC
 
Input / Output
SATA - 4x SATA3 (6Gbps) ports
LAN - 4x RJ45 10GBase-T ports
          1x RJ45 Dedicated IPMI LAN port
USB - 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
Video - 1x VGA Connector
Serial Port - 1x Serial header
DOM - 2x SATA DOM (Disk on Module) support with embedded power
 
System BIOS
BIOS Type - 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features - Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
 
Management 
Software - SuperDoctor® 5
          Intel® Node Manager 3.0
                  Watch Dog
                  NMI
                  SUM and SSM
                  Optional IPMI 1.5 / 2.0
Power Configurations - ACPI Power Management
                                     Power-on mode for AC power recovery
Chassis
Form Factor - 1U Rackmount
Model - CSE-819U
 
Dimensions and Weight
Height - 1.7" (43mm)
Width - 17.2" (437mm)
Depth - 29.7" (754mm)
Weight - Net Weight: 26 lbs (11.8 kg)
              Gross Weight: 41 lbs (18.6 kg)
Available Color - Black
 
Front Panel
Buttons - Power On/Off button
               System Reset button
LEDs - Power LED
            Hard drive activity LED
            2x Network activity LEDs
            System Overheat LED / Fan fail LED /
            UID LED
 
Expansion Slots
PCI-Express - 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
                       2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
Drive Bays 
Hot-swap 4x 3.5" Hot-swap drive bays
 
System Cooling
Fans - 4x heavy duty fans with optimal fan speed control
            4x additional fans optional
Air Shroud - 1x Air Shroud
 
Power Supply
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input - 100-127Vac, 50-60Hz
                 200-240Vac, 50-60Hz
+12V - Max: 62.5A & Min: 0A (100Vac-127Vac)
            Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB - Max: 2.1A
                Min: 0A

Motherboard Specification:

Product SKUs
MBD-X10DRU-i+ - X10DRU-i+
 
Physical Stats
Form Factor - Proprietary
Dimensions - 17" x 16.8" (43.18cm x 42.67cm)
 
Processor/Cache
CPU - Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s
Cores / Cache - Up to 22 cores † / Up to 55MB† cache
Note
† BIOS version 2.0 or above is required
Note
** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity - 1.5TB Registered ECC RDIMM, DDR4-2400MHz; Up to 3TB 3DS ECC LRDIMM, in 24 DIMM slots
Memory Type - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes - RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB
                       LRDIMM: 32GB, 64GB
                       3DS LRDIMM: 128GB
Memory Voltage - 1.2V
Error Detection - Corrects single-bit errors
 
On-Board Devices
Chipset - Intel® C612
SATA - Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
AHCI SATA - SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA - SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
          IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
          ASPEED AST2400 BMC
Network Controllers - Networking options provided via Ultra Riser
Graphics - Aspeed AST2400 BMC
 
Input / Output
SATA - 10 SATA3 (6Gbps) port
LAN 1
USB  - 3 USB 3.0 ports (2 rear + 1 Type A)
Video Output - 1 VGA port
Serial Port / Header - 2 COM Ports (1 rear, 1 header)
                                   2 fast UART 16550 serial
TPM - 1 TPM Header & Chip both
Expansion Slots
PCI-E - 1 PCI-E 3.0 x32 Left Riser Slot,
             1 PCI-E 3.0 x8 Right Riser Slot,
             1 PCI-E 3.0 x40 Ultra Riser Slot
See Ultra Riser Compatibility Matrix.
 
System BIOS
BIOS Type - 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features - Plug and Play (PnP)
                           PCI 2.3
                           ACPI 1.0 / 2.0 / 3.0 / 4.0
                           USB Keyboard support
                           SMBIOS 2.7.1
                           UEFI 2.3.1
 
Management
Software Intel® Node Manager, IPMI2.0, NMI, SuperDoctor® 5, Watchdog
Power Configurations - ACPI Power Management
                                     Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage - +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 5+1 Phase-switching voltage regulator, Memory Voltages, Monitors for CPU Cores, VBAT
FAN 8x 4-pin fan headers (up to 8 fans), Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control
Temperature - Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, 
                       Thermal Monitor 2 (TM2) support, PECI, Support to monitor Supermicro AOC temperatures from IPMI or SD 5
LED - CPU / System Overheat LED, UID/Remote UID, Memory DIMM ECC error LEDs
Other Features - 4x 8-pin GPU power connectors, Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC
 
Operating Environment
Operating Temperature Range - 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range - -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range - 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range - 5% - 95% (non-condensing)

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£1000 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK



CS 225053 - 225101 -45 a rails + CBL-SAST-0654 dup