•  
  • Applications:
  •  
    • Chrysler Aspen 2007-2009
    • Dodge Dakota 2005-2011
    • Dodge Durango 2004-2009
    • Dodge Ram 1500 2002-2010
    • Mitsubishi Raider 2006-2009
    • Ram 1500 2011-2013 (2012-2013 RAM 1500 used either 9/16″ or 14×1.5 Studs; Check stud size before ordering)
     
  • Note: Only work with 9/16"x18 studs, if you need 14x1.5 studs, you can contact us
  •  
  • Feature:
  •  

    • (4) 2" Wheel Spacers Adapters 5x5.5" 9/16" Studs Fits Dodge Ram 1500 Van Durango

     

    Applications:

     

    • Chrysler Aspen 2007-2009
    • Dodge Dakota 2005-2011
    • Dodge Durango 2004-2009
    • Dodge Ram 1500 2002-2010
    • Mitsubishi Raider 2006-2009
    • Ram 1500 2011-2013 (2012-2013 RAM 1500 used either 9/16″ or 14×1.5 Studs; Check stud size before ordering)

     

    Note: Only work with 9/16"x18 studs, if you need 14x1.5 studs, you can contact us

     

    Feature:

     

    • Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and studs for safety with ISO/DIN 10.9 (SAE Grade 8).
    • Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
    • It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
    • Be sure to torque the lug nuts to manufacturer specifications.
    • Avoid an impact wrench; improper usage may cause damage to components.
    • Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
    • No returns or exchange once installed.

    ​

     

    How to measure the fender gap to choose suitable thickness?

     

    (1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.

    (2)Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
     

     

    How to Install Wheel Spacers?

     

    1. Always make sure you are installing wheel spacers/adapters that are designed for your vehicle. Never use wheel spacers/adapters which do not fit properly.
    2. Park your vehicle on a hard, level surface. Break loose, but DO NOT REMOVE, the lug nuts that fasten the wheel to the hub with the tire iron or breaker bar BEFORE raising up your vehicle.
    3. Slide an automotive jack under the vehicle at an appropriate lift point and raise the vehicle enough to lift a single tire completely off the ground. Place a jack stand under your vehicle, and lower your vehicle on to the jack stand. Never work on or under a vehicle which is lifted only with an automotive jack, because it can easily fall or tip, causing injury or death.
    4. Finish removing the lug nuts on the raised tire. Slide the wheel off the hub and set it aside. Spray degreaser on the lug studs and wipe them down with a rag. If the hub is dirty, rusted, or pitted use a wire brush to clean up the surface. Wipe down the entire hub surface, making sure it is clean and smooth.
    5. If you are using Loctite to secure your spacer/adapter, place a drop of loctite on each wheel stud. Place your wheel spacer/adapter on to the hub, with the holes in the spacer lined up with the wheel studs, making sure the wheel spacer seats firmly against the hub. Attach the wheel spacer to your hub using the included bolts. Tighten the nuts that hold the spacer in place to the appropriate torque specification using a torque wrench. Do not overtighten or undertighten the nuts. If you have difficulty tightening the nuts because the hubs turn, have an assistant gently press the brake pedal to prevent the hub from turning.
    6. Slide the wheel onto the studs protruding from the wheel spacer/adapter so that it seats firmly against the spacer/adapter. Install your original lug nuts and tighten them to the appropriate torque specification. Tighten bolts in a star pattern to ensure proper seating of the wheel onto the spacer. Raise the vehicle with the automotive jack, remove the jack stand and lower the vehicle onto the newly installed wheel.
    7. Repeat steps 3-6 for each wheel.
    8. Double check that all lug nuts are tightened to the manufacturer’s specification MINUS 10% with a properly calibrated torque wrench in a crisscross, star pattern. In our experience tightening all the way to manufacturer torque specifications can occasionally damage/break /weaken the studs on the wheel spacer. However it is always a good idea to routinely check the tightness of the lug nuts, especially soon after installation.

     

     

     


    Item Specifics
    Manufacturer Part Number :LJT819514LJT
    Brand :LJT
    Material :High Quality t6 6061 Billet Aluminum
    Thickness :2 inch/ 50mm
    Wheel bolt pattern :5x5.5" or 5x139.7mm
    Vehicle bolt pattern :5x5.5" or 5x139.7mm
    Adapter Stud Size :9/16"
    Hub/Center Bore :108mm
    Warranty :1 year
    Surface Finish :Anodization Black Surface
    Lug Patterns :5Lugs
    Condition :New
    Stud Grade :10.9
    Quantity :4pcs
    Application :Fits Dodge Ram 1500 Dakota Durango Chrysler Aspen
    Color :Sliver
    Package Weight :18.37lb
    Place of delivery :Ontario,California
    Other Part Number :50mm or 2" Inch inches Wheel Adapter Spacers
    Superseded Part Number :Fit Dodge Chrysler Trucks Apdaters
    Interchange Part Number :5 lug 5x5.5 5x139.7 5 Lug PCD/Bolt Pattern
    Note :Only work with 9/16"x18 studs

    Payment

    We accept paypal only

    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!

    About Shipping

    1. Items will be shipped within 24 hours after getting your verified payment.

    2. US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time

    About Return

    •  We will gladly accept your return within 30 days of the original purchase.

    •  Our return process is simple and fast:

       1. We will pay for the return shipping label if you received a broken / defective item(s) or the item(s) doesn't match our description. As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.

       2. You will be required to pay for the return shipping label if you changed your mind or no longer need the item(s). As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.

    •  If we'll receive a package back because of the incorrect address, the refund will be processed excluding our shipping cost.

    Fitment Notes

    Please consult with your mechanic, or contact us, if you are not sure of fitment for your vehicle. READ the notes on the compatibility chart.

    We are not responsible for incompatible items due to buyer's error, and a restocking fee as well as shipping charges will be deducted from returns or exchanges.

    Shop Category
     Store Home
     Brake Rotors & Pads
     Towing Mirrors
     Wheel Hub Bearing
     Timing Belt Kits
     Door Handle
     Wheel Spacers
     Fuel Pumps
     Water Pump
     Fuel Injector
     Car Seat Cover
     Remote Key
     Car Cover
     Suspension Kit
     Leveling lift kit
     Wheel Lug Nuts
     ABS Wheel Speed Sensor
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    (4) 2" Wheel Spacers Adapters 5x5.5" 9/16" Studs Fits Dodge Ram 1500 Van Durango

     

    Applications:

     

    • Chrysler Aspen 2007-2009
    • Dodge Dakota 2005-2011
    • Dodge Durango 2004-2009
    • Dodge Ram 1500 2002-2010
    • Mitsubishi Raider 2006-2009
    • Ram 1500 2011-2013 (2012-2013 RAM 1500 used either 9/16″ or 14×1.5 Studs; Check stud size before ordering)

     

    Note: Only work with 9/16"x18 studs, if you need 14x1.5 studs, you can contact us

     

    Feature:

     

    • Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and studs for safety with ISO/DIN 10.9 (SAE Grade 8).
    • Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
    • It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
    • Be sure to torque the lug nuts to manufacturer specifications.
    • Avoid an impact wrench; improper usage may cause damage to components.
    • Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
    • No returns or exchange once installed.

    ​

     

    How to measure the fender gap to choose suitable thickness?

     

    (1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.

    (2)Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
     

     

    How to Install Wheel Spacers?

     

    1. Always make sure you are installing wheel spacers/adapters that are designed for your vehicle. Never use wheel spacers/adapters which do not fit properly.
    2. Park your vehicle on a hard, level surface. Break loose, but DO NOT REMOVE, the lug nuts that fasten the wheel to the hub with the tire iron or breaker bar BEFORE raising up your vehicle.
    3. Slide an automotive jack under the vehicle at an appropriate lift point and raise the vehicle enough to lift a single tire completely off the ground. Place a jack stand under your vehicle, and lower your vehicle on to the jack stand. Never work on or under a vehicle which is lifted only with an automotive jack, because it can easily fall or tip, causing injury or death.
    4. Finish removing the lug nuts on the raised tire. Slide the wheel off the hub and set it aside. Spray degreaser on the lug studs and wipe them down with a rag. If the hub is dirty, rusted, or pitted use a wire brush to clean up the surface. Wipe down the entire hub surface, making sure it is clean and smooth.
    5. If you are using Loctite to secure your spacer/adapter, place a drop of loctite on each wheel stud. Place your wheel spacer/adapter on to the hub, with the holes in the spacer lined up with the wheel studs, making sure the wheel spacer seats firmly against the hub. Attach the wheel spacer to your hub using the included bolts. Tighten the nuts that hold the spacer in place to the appropriate torque specification using a torque wrench. Do not overtighten or undertighten the nuts. If you have difficulty tightening the nuts because the hubs turn, have an assistant gently press the brake pedal to prevent the hub from turning.
    6. Slide the wheel onto the studs protruding from the wheel spacer/adapter so that it seats firmly against the spacer/adapter. Install your original lug nuts and tighten them to the appropriate torque specification. Tighten bolts in a star pattern to ensure proper seating of the wheel onto the spacer. Raise the vehicle with the automotive jack, remove the jack stand and lower the vehicle onto the newly installed wheel.
    7. Repeat steps 3-6 for each wheel.
    8. Double check that all lug nuts are tightened to the manufacturer’s specification MINUS 10% with a properly calibrated torque wrench in a crisscross, star pattern. In our experience tightening all the way to manufacturer torque specifications can occasionally damage/break /weaken the studs on the wheel spacer. However it is always a good idea to routinely check the tightness of the lug nuts, especially soon after installation.

     

     

     

    Item Specifics
    Manufacturer Part Number :LJT819514LJT
    Brand :LJT
    Material :High Quality t6 6061 Billet Aluminum
    Thickness :2 inch/ 50mm
    Wheel bolt pattern :5x5.5" or 5x139.7mm
    Vehicle bolt pattern :5x5.5" or 5x139.7mm
    Adapter Stud Size :9/16"
    Hub/Center Bore :108mm
    Warranty :1 year
    Surface Finish :Anodization Black Surface
    Lug Patterns :5Lugs
    Condition :New
    Stud Grade :10.9
    Quantity :4pcs
    Application :Fits Dodge Ram 1500 Dakota Durango Chrysler Aspen
    Color :Sliver
    Package Weight :18.37lb
    Place of delivery :Ontario,California
    Other Part Number :50mm or 2" Inch inches Wheel Adapter Spacers
    Superseded Part Number :Fit Dodge Chrysler Trucks Apdaters
    Interchange Part Number :5 lug 5x5.5 5x139.7 5 Lug PCD/Bolt Pattern
    Note :Only work with 9/16"x18 studs


    We accept paypal only

    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!

    1. Items will be shipped within 24 hours after getting your verified payment.

    2. US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time

    •  We will gladly accept your return within 30 days of the original purchase.

    •  Our return process is simple and fast:

       1. We will pay for the return shipping label if you received a broken / defective item(s) or the item(s) doesn't match our description. As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.

       2. You will be required to pay for the return shipping label if you changed your mind or no longer need the item(s). As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.

    •  If we'll receive a package back because of the incorrect address, the refund will be processed excluding our shipping cost.

    Please consult with your mechanic, or contact us, if you are not sure of fitment for your vehicle. READ the notes on the compatibility chart.

    We are not responsible for incompatible items due to buyer's error, and a restocking fee as well as shipping charges will be deducted from returns or exchanges.


    All right reserved.