PoE Kit (Injector + Splitter) for Non-PoE CCTV IP Camera
Power Output DC12V 1.3A
This kit uses higher voltage (DC48V) to reduce power loss in the network cable between the PoE Injector and the PoE splitter, thereby allowing longer network cable or improving the power supply environment of the device, especially the network cable is extremely long.
Please be noticed that there are following disadvantages of other 12V or 15V low voltage POE solutions:
1.The low voltage transmission in the network cable cause voltage actually supplied to the camera to be too low due to the large resistance, resulting in insufficient power supply of the camera, unstable operation, crash, etc.
2.Due to the large resistance of the low voltage on the network, the length of the network cable is generally limited to less 30meters.
3.The poor network cable quality can cause the power supply shortage.
This POE Injector Power Adapter Features:
Input / Output Specifications :
DC Input Voltage Max 60V DC
DC Input Voltage Min 18V DC
DC Output Voltage 12V DC
Max Output Current 1.3A Max.
Power Output DC Jack 5.5mm x 2.1mm
RJ45 Data PIN: 1/2 & 3/6
RJ45 Power PIN: 4/5+ & 7/8-
Ethernet Data rate 10/100 Mbp
Ethernet Cable TIA/EIA 568 Cat.5
Ethernet Cable Connector RJ-45
Input Pins |
Output Pins RJ45 Jack |
||
1 | Tx(+) | Tx(+) | 1 |
2 | Tx (-) | Tx (-) | 2 |
3 | Rx (+) | Rx (+) | 3 |
4 | V+ | N.C. | 4 |
5 | V+ | N.C. | 5 |
6 | Rx (-) | Rx (-) | 6 |
7 | GND | N.C. | 7 |
8 | GND | N.C. | 8 |
Item Included:
DC18-60V to 12V DC Buck Passive PoE Splitter Cable(with Waterproof accessory) x1
48V 0.5A PoE Injector Power Adapter x1