RAINBOW BEAT 1+ SMALL FOOTPRINT, BRAND NEW 1x 700W RMS IN 1OHM MONOBLOCK, TOP QUALITY CLASS-D AMPLIFIER - FULL KIT WITH WARRANTY

GREAT PERFORMANCE AND SOUND QUALITY GUARANTEED BY GERMAN RAINBOW. FULL RANGE OF  SUBWOOFER SETTINGS INCLUDING VARIABLE PHASE AND SUBSONIC FILTER, STABLE IN 1OHM, HI-INPUT WITH AUTO-START AND FLAWLESS BASS SOUND AND CONTROL.

TAKE A LOOK FOR REAL, MEASURED POWER OF BEAT 1+ WITH PROFESSIONAL MEASURING DEVICE - OVER 700W RMS AND 1200W IN 1OHM ! 

Compact, efficient and powerful. Lots of bass from a small package with a small “current hunger” thanks to Class D Full Range technology. Current down, power up. The high efficiency reduces the current consumption, but not the fun. High reliability due to little waste heat. And one of our new developments ensures interference-free radio reception despite Class D Full Rnage digital amplifier technology.

Solid, all of a piece. Thus, the design of the BEAT is best described. The compact and powerful amplifiers are well processed and good „motorized“. The clean circuit boards with SMD layout is well thought out and structurally characterized in the small but effective power output. As known from the iPaul series also the top-control principle is used.

If we do not talk about their more obvious features, such as variable subsonic filter, phase, lowpass and switchable bass boost, smart high level input, we can still talk about flawless sound quality, class D efficiency and small footprint size.

Perfect match to ambitious subwoofer no matter of impendance, able to feed very hungry subwoofers.

Features:

Smart highlevel input with auto-start

Wide range settings for perfect subwoofers tunning

Extremely stable output stage with high-current power transistors

Easy adjustment due to Top Control
   
Performance amplifier with integrated high-current MOSFET-switch power supply

Amplifier design for minimal noise

Reversible safety switch-off with thermal monitoring

Safety switch-off with DC current to speakers

Safety switch-off for loudspeaker short-circuit and loudspeaker under impedance

Softstart remote muting for suppression of switch-on peaks

High-tech SMD built structure with low coupling conductive wiring

Palladium-plated 20 mm² power and 10 mm² speaker connection

Interference-proof certified by European CE-Standard

Phase Shifter variable 0° to 180°

Signal Noise Ratio more than 90 dBA

Operating Voltage 11V to 16V

Integrated flat fuse in accordance with DIN-standard, replaceable from outside

Class D high efficiency

Small, footprint size allows to instal it almost everywhere in car, even under seat

Specifications:

Output power RMS 13,8V:

@ 1 Ohms  1 x 600 W
@ 2 Ohms  2 x 600 W
@ 4 Ohms  2 x 400 W

Amplifier technology  Class D

Inputs:

2 x RCA / Cinch
2 x Highlevel speaker input
1 x Remote In

Input sensitivity RCA / Cinch 0,25 - 6 Volts
Highlevel 6 - 10 Volts

Outputs:

2 x Speaker output

Frequency response  15 Hz - 250 Hz
Bass boost  switchable 0/3/6 dB / 45 Hz
Subsonic  15 Hz - 50 Hz adjustable
Lowpass  50 Hz - 250 Hz adjustable
Slope highpass / lowpass  Butterworth 24 dB/Oct.
Phase Shift variable 0° to 180° 
Signal-to-noise ratio analog input  90 dB (A-weighted)
Distortion (THD)  0.02 %

Fuse  2 x 25 A Maxi-fuse (APX)

Protection processor: overvolad, overheating, short-circuit

Dimensions 241mm x 200mm x 56mm

INCLUDES:

- RAINBOW BEAT 1+
- FACTORY BOX
- MANUAL
- MOUNTING SCREWS, HI-INPUT PLUG, 2 TYPES OF MOUNTING HOLDERS (4x piece each type), ALLEN KEY, EXTRA FUSES
- 1 YEAR WARRANTY