3L River Art Resin High Performance 2:1 Epoxy Resin
Ultra-Clear VOC Free Deep Pour 2-3cm
Unleash the Maker in you, Pour – Layer – Spray – Brush to create whatever you need this be.
Mixes well with MICA powders, Inks and dyes. There are endless amounts of ideas you can create – invent – make anything you want.
Mix 2:1 by Weight Ratio in Grams
· 3 Litre size (2 Litre Part A and 1 Litre part B)
Quality Guaranteed 100%
Why choose River Art Resin Epoxy?
Non-Toxic Non-Flammable VOC Free
- Crystal Clear Finish: Cures Crystal Clear. Suitable for wooden bar tops, River Tables, Jewellery, & more.
- UV Resistant: Added UV Inhibitors resist yellowing when exposed to the Sun and Ultra Violet light
- Self-Level Mixture: Our epoxy will self-level over leaving a consistent thickness
- Bubble-Free: Epoxies may bubble, easily releases all bubbles due to low viscosity, can be used with a heat gun to increase release speed.
- Impact Resistant: Cures super strong, leaving a smooth impact-resistant surface
- Minimal odour and NOT AT ALL yellowing after a long period of time.
- River Art Resin Epoxy will leave your projects with a Solid, UV resistant, impact resistant high gloss finish. Don’t ruin a one-of-a-kind project with a cheap epoxy.
This Ultra/Crystal Clear Epoxy Resin is a ‘top of the line’ water clear superior performance epoxy system that can be used for so many applications including —Casting, Jewellery, Surfboards, Bench Tops, Boat repairs, Floor and Bench Top coating
Following factors affect the curing time:
Mixing quantity (the more you mix, the fast it cures and vice versa)
Room Temperature (higher room temperature will speed up the curing)
Mixing ratio: 2:1 (2 Parts A and 1 Part B)
Application temperature: 25°C
Processing Time: 40mins – 1hrs
Gel Time: 6-8 hrs
Curing Time: 8-12hrs (Data based on 100ml mixing @ 25°C)
Viscosity: 600 CPS for Part A
450 CPS for Part B
Clarity: Pt-Co value < 10 for both Part A and Part B (Crystal Clear)
Compatibility: Binding to metal, inorganic materials including cement; stone, natural materials including wood; particleboard, most plastics except polyethene, polypropylene, EPDM.
Available order quantity: 750ml - 1.5 Litre - 3 Litre – 6 Litre
Shelf life: 18 months
Instructions:
1. Ensure that all tools and containers are clean and dry
2. Mix Part A and B and stir thoroughly until well combined
3. If using dyes or powders, please mix well to make sure
all is mixed by scraping the container walls allowing the resin to combine.
4. The epoxy will react and produce heat. The larger amount
mixed, the more heat will be generated and the curing time
will be shortened.
5. Always use safety equipment while handling resin, gloves
face masks and safety glasses.
Product Parameters
Exterior................Transparent viscous body
Viscosity.......................................500-800CPS
Processing Time ....................25°C 40mins -1hr
Gel Time....................................25°C 6-8 hours
Cure Time.................................25°C 8-12 hours
Shelf life............................................18 months
Hardness......................................Shore D > 85
Tips
1. Make sure to wear gloves when using this product.
2. For easy clean up, cover the other areas with plastic sheets to prevent making a mess.
3. Create a sealed barrier before pouring to avoid a leak and eliminate wastage.
4. For best results, make sure the you pour on a level surface.
5. Make sure all Air conditioning and Fan Systems are switched off while curing.